743361

Worcester-Bosch Greenstar 8000 Style Manual

9
Zoom out
Zoom in
Previous page
1/16
Next page
Operating the appliance
9
Greenstar 8000 Style – 6720883869 (2018/05)
4.4 Hot water mode
4.4.1 Hot water key
Hot water function is only available with optional integral diverter valve
kit fitted.
CAUTION:
Risk of scalding
At maximum adjusted hot water temperature can cause serious scalding.
▶ Only use the maximum adjustable hot water temperature for thermal
disinfection.
▶ Press the * key.
The set hot water temperature appears.
▶ To set the desired hot water temperature, press the or keys.
▶ To save the setting, press the key or wait for 2 seconds.
The symbol appears for a short time.
▶ To switch hot water operation mode, press the key.
In eco mode the appliance will heat the cylinder if the temperature falls
approximately 12 °C below the set temperature. Eco mode is enabled by
default, during the initial appliance start up.
In Preheat mode the appliance will heat the cylinder if the temperature
falls approximately 6 °C below the set temperature. The appliance heats
the cylinder more frequently. This tops up the cylinder temperature for
quicker heat up times, this is useful for large/longer demand periods.
If a time program is available and hot water operation mode set on auto
press the key to switch to Advance. Time programs are available
with Key (accessories).
Auto: Heating the cylinder is switched on and off according to
programmed times.
Advance: Switch to Advance to move to the next on or off time and
directly switch on or off heating the cylinder.
4.5 Operating the menu
Opening and closing the menu
▶ To open the menu, press the key.
▶ To exit the menu, press the key again.
-or-
▶ Press the d key.
Changing the setting values
▶ To highlight a menu item, press the key or the key.
▶ Select the menu item with the OK key.
▶ To change the value, press the or key.
▶ Press the key.
The new value is saved.
Exiting the menu without saving values
▶ Press the d key.
4.6 Settings in the menu
The factory settings are highlighted in the following table.
Table 5 Settings Menu
Menu item Function definition
Heating mode • On
• Auto
1)
: Activate time program
• Once: Heating is on from the first programmed on time
to the last programmed off time without programmed
intermissions.
1) Only available with installed Key (accessories)
Heat. time prog.
1)
Timer for heating: Weekday(s) selection, day program and
timer adjustment (
"Time program", page 10)
1)
DHW operation • On
• Auto: Activate time program.
• Once: Heating the cylinder is on from the first
programmed on time to the last programmed off time
without programmed intermissions.
Eco/Preheat • Eco: Appliance will heat the cylinder if the temperature
falls approximately 12 °C below the set temperature for
hot water.
• Preheat: Appliance will heat the cylinder if the
temperature is approximately 6 °C below the set
temperature for hot water.
DHW time prog.
1)
Timer for hot water: Weekday(s) selection, day program
and timer adjustment (
"Time program", page 10)
1)
Boiler status Screen with current system values including the pressure
indicator.
Information The current system values and the active operating
conditions can be called up in the Information menu.
Changes are not possible.
• System pressure
• Hot water Temp. (DHW temperature)
• Weather comp. (weather-compensated control)
1)
• Key (Type of installed Key)
Energy consump.
2)
2) The energy values shown are an estimation based on internal data of the
appliance. Under real world conditions, many factors influence the energy
consumption and the shown values will deviate from the values of an energy
meter. The information is for indication only and should not be used for billing
purposes. The values can be used for relative comparison of energy consumption
between different days/weeks/month.
Display Gas consumption
• Last 24h
• Last 30 days
Display Elec. consump.
• CH last 24 h
• CH last 30 d.
Holiday
1)
Start and end date of the holiday, activate and deactivate.
Settings • Time: Set the current time.
1)
• Date: Set the current date.
1)
• Parental lock
–On
– Off
• Display
– Switch off after: Set the time after which the display
is switched off.
– Brightness: Set the display brightness.
• Key illum.
• Language: Change the language of the menu and the
menu items.
• Units
1)
Cleaning funct. No operation is possible for 15 s. The display shows a
countdown.
Manual mode
3)
3) Allows manual control of heating during loss of RF Key signal
• On: Set the desired heating flow temperature.
• Off
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worcester-Bosch Greenstar 8000 Style at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worcester-Bosch Greenstar 8000 Style in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info