697438
47
Zoom out
Zoom in
Previous page
1/64
Next page
47
Commissioning
GREENSPRING CWi47 – 6 720 646 322 (2015/04)
Press and hold “Program” button and press ON/OFF
button to turn appliance ON ( Fig 61).
Fig. 61
As soon as '188' is displayed, release "Program" button
, and the display should read P2.
▶Press one time to access the program P2. In the LCD
display is visible the attributed value (factory value: 12).
▶Press or to choose the fan speed suitable with
your installation, see tab. 27 for concentric conducts Ø
80/125 mm.
▶Press and hold ( 5 sec.) “Program” button until the
display flashes.
Selected value is memorized.
Fan speed for concentric flue Ø80/125 mm
9.8 Registration of remote control
Only a qualified technician is allowed to install the additional
PCB that is supplied with the remote (part number: 7709 003
736). Registration can only be made after installation on the
PCB.
The registration of the remote control must be done near the
appliance.
Turn off the hot water tap.
Turn OFF the appliance (Fig. 8, [1]).
Press and hold the programming button (Fig. 8, [3]), press
ON/OFF button (Fig.
8, [1]) to connect the appliance.
Release programming button only when LCD displays
“188”.
The LCD displays the signal "P2".
▶Press button , until it displays the signal "P3".
Press programming button again for about 1 second.
LCD panel displays one number and one rotating digit.
The number represents the remote control which is to be
registered, the first remote control will be registered with
number “0”, the second with number “1” and so on.
Test the remote control in front of the electronic box by
simultaneously pressing the
and control
buttons.
Fig. 62 Activate new control
Press both buttons on the remote control until the LCD
panel stops flashing and shows the indication “00”.
Press ON/OFF button ( Fig. 8, [1]) to disconnect the
appliance.
Remote control is now activated.
Mode Flue length
1)
1) Total flue lengths of Table 25 do not count with the first
elbow and the horizontal flue kit.
Fan speed
P2 From 1 m until 3 m 12
from 3.1 m until 7 m 13
from 7.1m until 8 m 14
Table 27
Do not set P2 to greater then 14.
6720608920-19.1AL
+
NOTE: up to 6 remote controls can be
connected to a single water heater, each with
a range distance of 30m.
Press the ON/OFF button to turn ON the
remote control and it’s ready to work.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worcester-Bosch GREENSPRING CWi47 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worcester-Bosch GREENSPRING CWi47 in the language / languages: English as an attachment in your email.

The manual is 5,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info