809313
7
Zoom out
Zoom in
Previous page
1/12
Next page
Operating the appliance
6720814333 (2018/04) 7
4.2 Setup menu
The boiler settings can be displayed and modified via the setup menu.
Proceed as follows:
▶Press O to open the setup menu.
Navigate the menu with M and N keys.
▶Press and hold O to access a setting. Once the setting flashes it can
be modified.
Change the setting via M and N keys.
▶Press
O to save the setting. The setting no longer flashes.
The display values shown are the default settings.
4.3 Anti-Freeze Protection
Parts of the line may freeze during the cold season. Water permanently
flows through the heating system which significantly reduces the
probability of freezing.
Check whether all radiator valves are open.
Press O to open the setup menu.
Set the pump over-run time to 24 hours (Chapter 4.2).
If the boiler is switched off, see Chapter 6.2.
4.4 Key lock
The setup menu can be locked to prevent the settings from being
changed by unauthorised personnel. Proceed as follows:
Activation
Press the M and N keys simultaneously for 5 seconds.
The word “Lock” is displayed for 5 seconds. The information menu
remains readable.
Fig. 6 Display - Lock
Disable
Press the M and N keys again simultaneously for 5 seconds to
remove the key block; the word “Lock” disappears.
Current ionisation current [μA].
Current burner output [%] during heating
mode R. Mod = modulation
Current pump speed [%].
Mod = modulation
Setup menu
“menu” is displayed for 1 second.
Heating mode is switched on.
Setting: On, Off.
Set the maximum boiler flow temperature
based on the heating system type.
Adjustment range: 30 - 90 °C.
Examples of settings:
40 °C underfloor heating system
75 - 85 °C radiators
85 - 90 °C convectors
Set the maximum output of the heating
system.
The output is displayed in % when modifying
the setting.
Adjustment range: 0 - 100%.
No information about DHW mode is shown
here.
Change the minimum pump speed if
required.
Adjustment range:
30 % - max. (setting max. parameter).
Increase the minimum pump speed if parts
of the heating system do not become hot
enough.
Table 5 Setup menu
Information menu
Table 4 Information menu
Change the maximum pump speed if
required.
Adjustment range
min. (setting min. parameter):
50-V2 - 57%
65-V2 - 65%
85-V2 - 65%
100-V2 - 83%
Reduce the maximum pump speed if
aggravating flow noises can be heard.
Pump over-run time following end of heating
demand [Min].
Adjustment range: 1 - 60 min./24 hours.
Setup menu
Table 5 Setup menu
6 720 614 523-133.2TD
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worcester-Bosch GB162 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worcester-Bosch GB162 in the language / languages: English as an attachment in your email.

The manual is 2.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info