697434
47
Zoom out
Zoom in
Previous page
1/72
Next page
Inspection
6720813171 (2016/05) 47
Close the gas valve [1].
Close the isolating valves[2].
Fig. 100 Closing the valves (here: in closed position)
12.2 Opening the boiler door
Turn the vent key through a quarter rotation to undo the boiler door
lock ( detailed picture).
Push the fastener down and open the boiler door.
Fig. 101 Opening the boiler door
12.3 Carry out a visual check for general signs of
corrosion
Check all gas and water-bearing pipes for signs of corrosion and for
leaks.
Replace any pipes that have corroded.
Carry out a visual inspection of the burner, heat exchanger,
condensate trap, automatic air vent and all fittings in the boiler.
12.4 Gas valve leakage test
Check the internal tightness of the gas fitting on the input side (with the
boiler switched off) at a test pressure of 20 mbar for natural gas.
Open the screw plug on the testing nipple for the gas connection by
2 turns.
Connect the pressure gauge tube to the testing nipple. The pressure
drop allowed after one minute is max. 10 mbar.
If the pressure drop is higher, check all sealing locations of the gas
fitting for leaks using a foaming product. Repeat the pressure test if
no leaks are found. Replace the gas fitting if the pressure drop is
higher than 10 mbar per minute again ( section 13.2.1 “Removing
the gas valve” on page 49 for instructions on how to remove).
Fig. 102 Checking the gas fitting for internal tightness
12.5 Measuring the ionisation current
See section 10.2.11 “Measuring the ionisation current”, page 43.
12.6 Measuring the gas inlet pressure (working pressure)
See section 10.2.6 “Measuring the gas inlet pressure (working
pressure)”, page 40.
12.7 Checking and adjusting the gas/air-ratio
See section 10.2.7 “Checking and adjusting the gas/air-ratio”, page 41.
12.8 Carrying out a leakage test in operating conditions
See section 10.2.8 “Carrying out a leakage test in operating conditions”,
page 42.
12.9 Measuring the flue gases CO
2
emissions
See section 10.2.9 “Measuring the flue gases CO2 emissions”, page 43.
12.10 Filling the heating system
See section 10.1 “Filling the heating system”, page 37.
12.11 Checking the flue gas connection
See section 10.2.4 “Checking the flue gas connection”, page 40.
DANGER:
Danger of fatal accident from explosive fumes.
Only carry out work on gas pipes and fittings if you
are Gas Safe / ACS registered.
If the boiler door cannot be swung open completely,
remove it ( section 13.1 “Removing the boiler door”,
page 48).
6 720 648 726-101.1TD
2 2
1
6 720 648 726-038.1TD
6 720 648 726-085.1TD
2
1
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worcester-Bosch GB162-80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worcester-Bosch GB162-80 in the language / languages: English as an attachment in your email.

The manual is 5,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worcester-Bosch GB162-80

Worcester-Bosch GB162-80 Installation Guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info