697434
31
Zoom out
Zoom in
Previous page
1/72
Next page
Installation
6720813171 (2016/05) 31
Install the wall bracket (accessory with function module) in the
relevant slots in the draw.
Fig. 61 Installing the wall bracket
Click the function module(s) into place in the wall bracket.
Remove the draw.
Fig. 62 Clicking the function module into place in the wall bracket
Remove the covers of both free connectors on the function module
connection cables.
Slide the draw back into the boiler.
Fig. 63 Removing the covers
Connect the free 230 VAC mains cable ( fig. 63) to the module
[1]. If more modules are used, the 230 VAC supply for the second
module can be taken from the first module using the cable enclosed
with the module.
Fig. 64 Interconnecting modules
Connect the 230 VAC mains cable of the first module to the next
module.
Fig. 65 Connecting several modules
Connect the free connector of the EMS bus connecting cable to the
first module ( fig. 64, [2]).
If more modules are used, the EMS bus connection for the second
module may be branched off from the first module using the cable
enclosed with the module ( fig. 65 and 66).
6 720 648 726-061.1TD
6 720 648 726-062.1TD
6 720 648 726-063.1TD
The module may have the letters RC or EMS above the
connection [1].
NOTICE:
Pay attention to the polarity when using an EMS bus
connection cable.
Connect the wire from terminal 1 to terminal 1 and
from terminal 2 to terminal 2 ( fig. 65 and 66).
2
1
6 720 648 726-064.1TD
11
6 720 648 726-065.1TD
To the 230 VAC mains plug in
the earthed socket or a free
connector in the boiler.
To a free connector in the boiler or
the terminal strip. Note: This
connection is not reverse-proof.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worcester-Bosch GB162-80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worcester-Bosch GB162-80 in the language / languages: English as an attachment in your email.

The manual is 5,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worcester-Bosch GB162-80

Worcester-Bosch GB162-80 Installation Guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info