697435

Worcester-Bosch GB162-100 Manual

59
Zoom out
Zoom in
Previous page
1/72
Next page
Display information
6720813171 (2016/05) 59
e
[a/1/1|
e
[8/2/3|
e
Fault:
RC35-HK1 remote control. No remote control assigned,
although frost protection type “FROST” has been set.
No Off Since there is no actual room
temperature information,
room influence and
optimization of the switch
times do not work. The EMS
works on the basis of the
values last set on the remote
control.
e
[a/1/1|
e
[8/2/4|
e
Fault:
RC35-HK2 remote control. No remote control assigned,
although frost protection type “FROST” has been set.
e
[a/1/1|
e
[8/2/6|
e
Fault:
RC35-HK1 temperature sensor. The external temperature
sensor of the remote control (control unit) of heating
circuit 1 is defective.
No Off Since there is no actual room
temperature information,
room influence and
optimization of the switch
times do not work. The EMS
works on the basis of the
values last set on the remote
control.
e
[a/1/1|
e
[8/2/7|
e
Fault:
RC35-HK2 temperature sensor. The external temperature
sensor of the remote control (control unit) of the heating
circuit is defective.
e
[a/1/2|
e
[8/1/5|
e
Fault:
The contacts to the switch sensor have shorted or are
interrupted, the sensor has been connected incorrectly or
is defective.
No Off Limited operation of all
heating programs, holiday
function, fault list.
e
[a/1/2|
e
[8/1/6|
e
Fault:
WM10 not available or no communication. WM10 or bus
circuit connected incorrectly or defective, WM10 is not
recognized by the RC35.
No Off Heating circuit pump 1 is
activated continuously.
e
[a/1/8|
e
[8/2/5|
e
Fault:
Conflicting addresses. Both RC25 and RC35 are
registered as Master.
No Off Both RC35 and RC25 activate
heating circuit 1 and DHW.
Depending on the heating
programs set and the
required room temperatures,
the heating system can no
longer work correctly. DHW
mode does not work well.
e
[a/2/1|
e
[8/0/6|
e
Fault:
RC25-HK1 temperature sensor. The integrated
temperature sensor of the remote control (control unit) of
heating circuit 1 is defective.
No Off Since there is no actual room
temperature information,
room influence and
optimization of the switch
times do not work. The EMS
works on the basis of the
values last set on the remote
control.
e
[a/2/1|
e
[8/1/6|
e
Fault:
RC25-HK1 communication. RC25 addressed incorrectly,
wired incorrectly or defective.
No Off Since there is no actual room
temperature information,
room influence and
optimization of the switch
times do not work.
e
[a/2/2|
e
[8/0/6|
e
Fault:
RC25-HK2 temperature sensor. The integrated
temperature sensor of the remote control (control unit) of
heating circuit 2 is defective.
No Off Since there is no actual room
temperature information,
room influence and
optimization of the switch
times do not work. The EMS
works on the basis of the
values last set on the remote
control.
e
[a/2/2|
e
[8/1/6|
e
Fault:
RC25-HK2 communication. RC25 addressed incorrectly,
wired incorrectly or defective.
No Off Since there is no actual room
temperature information,
room influence and
optimization of the switch
times do not work.
Display codes
Display code
LED on
UBA 3 Other effectsz
Main
display
code
z
Sub
display
code
z Key to display code
Reset
requi-
red?
Table 24 Display codes
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worcester-Bosch GB162-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worcester-Bosch GB162-100 in the language / languages: English as an attachment in your email.

The manual is 5,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worcester-Bosch GB162-100

Worcester-Bosch GB162-100 Installation Guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info