782142
15
Zoom out
Zoom in
Previous page
1/16
Next page
15
Parts
PRIOR TO USE
For technical packaging reasons, your machine is not assembled fully. Unpack the appliance
and check that all parts are included. If any part is missing or damaged, contact your dealer
immediately. Dispose all packing material according to local regulations.
Assemble the machine as follows:
1. Attach the base and the base plate with Phillips head screws M5 x 6 mm.
2. Attach the side covering loosely to the base frame using flat-head screws M8 x 40 mm
and nuts. Hand-tighten.
3. Attach the support plate to the left and right side panel with flat-head screws M 8 x 12
and nuts.
4. Attach the housing to the side panels using flat-head screws M5 and nuts (attached to
the housing). Securely tighten all nuts.
5. Slide in the filter bag over the case and attach it with a clamp. Position the support bar
into the housing and hang the filter bag from it.
6. Attach the shavings bag to the lower air ventilator using the clamp.
7. Attach the suction hose to the nozzle on the housing and affix it with a hose clamp.
8. Attach the suction connector to the other end of the suction hose using a hose clamp.
1. Motor casing
2. Base with wheels
3. Left side panel
4. Right side panel
5. Base plate
6. Support plate
7. Filter bag
8. Upper clamp
9. Support bar
10. Container
11. Lower clamp
12. Suction hose
13. 2 x hose clamp
14. Suction connector
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Woodtec XW117 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Woodtec XW117 in the language / languages: English, Swedish, Finnish as an attachment in your email.

The manual is 0.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info