❖ The operational status indicator « HEATING » (E / s. chapter 3.2 CONTROL
PANEL) indicates that the oven is heating. When the operational status indicator
goes off the oven has reached the temperature you preset.
❖ If a recipe recommends to place dishes in a warmed-up oven, place the dishes in
the oven after the operational status indicator « HEATING » has gone off for the
first time.
❖ While the oven is used, the operational status indicator « HEATING » will go off
and on temporarily to maintain the preset temperature.
4.2.2 Standby mode
After you have connected the appliance to the mains, the appliance is in STANDBY
MODE generally.
❖ In STANDBY MODE, the set time is displayed and the decimal point symbol « »
flashes once per second.
❖ After 10 seconds without using any operating buttons, the brightness of the
display will be reduced automatically. Press any operating buttons to restore the
original brightness of the display.
4.2.3 Manual operating mode
Before you can set the time or select an oven function or an oven
temperature, you must activate the manual operating mode.
1. In STANDBY MODE, press the programme button (manual button) « » for 3
seconds to activate the manual operating mode.
2. The operational status indicator "OVEN IN USE" « » and the DECIMAL POINT
SYMBOL « » on the display go on permanently.
3. The manual operating mode of the oven is activated.
4.2.4 Setting of the time
Before you can use the oven generally, you must set the time.
Please note that the appliance is equipped with a 24-hour display. E.g.: if you
want to set the time 1.00 p.m., you must set the display to 13.00 o`clock, etc.
