Manual Wolkenstein SFD540NF SI W (page 66 of 92) (English, German)

742953

Zoom out

Zoom in

1/92

NOTICE! Leave the appliance in an upright position for at least 4 - 6

hours before you connect it to the mains to ensure, that the oil has

flowed back into the compressor.

NOTICE! If you use the appliance for the first time or the appliance has

been disconnected from the mains for a longer period of time, allow the

appliance to cool down for 3 until 4 hours on medium temperature

setting (s. chapter 4.5 SETTING OF THE TEMPERATURE) before you place

any fresh or frozen food in the appliance. If you place food in the

appliance before it has reached its normal operating temperature, this

food can thaw and / or spoil.

1. Remove all packaging materials.

2. Adjust the feet and clean the appliance (see chapter CLEANING AND

MAINTENANCE).

3. Do not start the appliance immediately after installation. Wait at least 4 - 6

hours to ensure proper operation.

4. The settings of the temperature of the fridge can be adjusted manually. To do

this, turn the thermostat for the temperature to the desired setting. (s. chapter

4.5 SETTING OF THE TEMPERATURE).

5. If operation was interrupted, wait at least 5 minutes before restart.

6. The appliance needs some time to balance temperatures when you have

changed the settings before or when you have stored additional food in the

appliance. The duration of this period of time depends on the range of the

change, the ambient temperature, the amount of food and the frequency of

door-openings. When you set the temperature of both the fridge and freezer,

these aspects should be taken into account.

7. Operate the appliance according to the instructions described in the following

chapters.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wolkenstein SFD540NF SI W in the language / languages: English, German as an attachment in your email.

The manual is 1,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wolkenstein SFD540NF SI W Manual

Product: