742946
63
Zoom out
Zoom in
Previous page
1/94
Next page
63
4. Operation
WARNING! To disconnect the appliance from the mains, you must
unplug the appliance or use a cut-off device.
4.1 Before initial operation
WARNING! While unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept away from children and
pets. CHOKING HAZARD! RISK OF INJURY!
NOTICE! Leave the appliance in an upright position for at least 6 - 8
hours before you connect it to the mains to ensure, that the oil has
flowed back into the compressor.
NOTICE! If you use the appliance for the first time or the appliance has
been disconnected from the mains for a longer period of time, allow the
appliance to cool down for 3 until 4 hours on medium temperature setting
(s. chapter 4.5 SETTING OF THE TEMPERATURE) before you place any fresh
or frozen food in the appliance. If you place food in the appliance before
it has reached its normal operating temperature, this foods can thaw and
/ or spoil.
1. Remove all packaging materials.
2. Adjust the feet and clean the appliance (see chapter CLEANING AND
MAINTENANCE).
3. Do not start the appliance immediately after installation. Wait at least 6 - 8
hours to ensure proper operation.
4. The settings of the temperature of both the fridge and freezer can be adjusted
manually by pressing the relevant buttons until the desired values will be
indicated (s. chapter 4.5 SETTING OF THE TEMPERATURE).
5. If operation was interrupted, wait at least 5 minutes before restart.
6. The appliance needs some time to balance temperatures when you have
changed the settings before or when you have stored additional food in the
appliance. The duration of this period of time depends on the range of the
change, the ambient temperature, the amount of food and the frequency of
door-openings. When you set the temperature of both the fridge and freezer,
these aspects should be taken into account.
7. Operate the appliance according to the instructions described in the following
chapters.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wolkenstein SBS500A IX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wolkenstein SBS500A IX in the language / languages: English, German as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info