742756
28
Zoom out
Zoom in
Previous page
1/40
Next page
28
Levelling
1. Use the adjustable feet at the front to level the appliance properly.
2. When the appliance is not levelled, the door and the magnetic seals will not
close properly.
3.2 Changing of the hinge position
Important information: The change of the hinge position should be carried
out by a qualified professional only
3
! The following information is intended for
persons, who are experienced in such a work.
WARNING! Switch off and unplug the appliance before changing the
hinge position. RISK OF ELECTRIC SHOCK!
CAUTION! The change of the hinge position must be carried out by
at least two persons; otherwise you may hurt yourself or damage the
appliance. Do not tilt the appliance more than 45
0
.
NOTICE! Empty the appliance before. Set the adjustable feet to their
highest position.
1. Remove the two cover caps on the worktop carefully using a small pointed
object and unscrew the two worktop-screws (fig. 1). Then unscrew the screws
on the back. Remove the worktop and the top hinge bracket (fig. 2).
2. Open the door slightly and remove it from the bottom hinge.
3. Tilt the appliance slightly backwards. A second person should hold the
appliance now, so you have access to the bottom hinge.
4. Remove the two screws of the bottom hinge. Remove the adjustable foot on the
left and fix it on the opposite side (fig. 3).
5. Fix the bottom hinge on the opposite side.
6. Remove the sealing plug from the top left opening of the door und press it
firmly into the top right one.
7. Place the worktop upside down. Remove the hinge bracket (with axis, fig. 2) and
fix it on the opposite side. Do not tighten the screws too firmly.
8. Reinstall the door. Check, that the hinge axis meets its proper position in the
bottom left opening of the door.
9. Place the worktop on the appliance with the door closed. Check, that the top
axis meets the top opening (where the seal plug was). Fasten the two top screws
first and then the screws on the back slightly. Adjust the worktop properly.
Check, that the door is adjusted perpendicularly.
10. Now tighten all 4 screws of the worktop. Do not tighten the screws too firmly.
3
Not covered by guarantee!
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wolkenstein KS 95 RT LB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wolkenstein KS 95 RT LB in the language / languages: English, German as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info