566159
34
Zoom out
Zoom in
Previous page
1/52
Next page
34
3061331_201305
Planungshinweise Wasseraufbereitung
Beispiel:
Anlagenleistung = 170kW;
Anlagenvolumen V
Anlage
= 4000 l;
Volumen des Ergänzungswassers V
Ergänzung
= 1000 l
Gesamthärte des Trinkwassers C
Trinkw.
= 18,5 °dH;
Maximal zulässige Gesamthärte C
max
= 8,4°dH
Anlagenleistung = 170 kW;
Anlagenvolumen V
Anlage
= 4.000 l;
Volumen des Ergänzungswassers V
Ergänzung
= 1.000 l
V
A spez
= 4000 l / 170 kW = 23,53 l/kW
Gesamthärte des Trinkwassers C
Trinkw.
= 18,5 °dH;
Maximal zulässige Gesamthärte C
max
= 8,4°dH
Anteil des aufzubereitenden Füllwassers:
A = 100% - [(8,4 - 0,1) / (18,5 – 0,1)] x 100% =
54,9%
Es müssen 54,9% des Füll-, und Ergänzungswas-
sers entsalzt werden.
V
Aufbereitung
= 54,9% x (4.000 l + 1.000 l) = 2.746 l
Beim Befüllen der Anlage müssen 2.745 l entsalztes
Wasser eingefüllt werden. Anschließend kann bis V
max mit Trinkwasser nachgefüllt werden.
Beim Nachfüllen muss regelmäßig geprüft werden,
dass die zulässige Gesamthärte nicht überschritten
wird.
Beispiel:
Anlage mit einem 170kW Kessel;
Anlagenvolumen V
Anlage
= 4000 l
V
A, spezisch
= 4000 l / 170kW = 23,5 l/kW
Dies ist größer als 10 l/kW, dadurch muss anstelle der
Stufe 2 die Stufe 3 gewählt werden. Das Füll-, und Ergän-
zungswasser muss im Bereich von 2 bis 8,4°dH liegen
Wenn die Gesamthärte des unbehandelten Trinkwas-
ser zu hoch ist, muss ein Teil des Füll-, und Ergän-
zungswassers entsalzt werden:
Es müssen A% entsalztes Wasser eingefüllt werden:
A = 100% – [(C
max
– 0,1 °dH) / (C
Trinkwas.
– 0,1 °dH)]
x 100%
C
max
Maximal zulässige Gesamthärte in °dH
C
Trinkwasser
Gesamthärte des unbeh. Trinkwassers in °dH
Wir empfehlen bei der Erstbefüllung das zu erwarten-
de Ergänzungswasser mit einzurechnen. Dann kann
später mit unbehandeltem Trinkwasser nachgefüllt
werden.
V
Aufbereitung
= A x (V
Anlage
+ V
Ergänzung
)
Bei großen Anlagen in Stufe 4 darf das Ergänzungs-
wasser bei der Erstbefüllung nicht mit berechnet
werden.
V
Aufbereitung
= A x (V
Anlage
)
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wolf MGK-250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wolf MGK-250 in the language / languages: German as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info