Manual WOLF-Garten UV 35 B (page 11 of 90) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

517906

Zoom out

Zoom in

1/90

z Take particular care when turning the machine or when pulling

it towards you.

z Stop the working tools if:

– the machine needs to be tilted for transport.

– if areas other than grass are to be crossed

– when transporting the machine.

z Never use the machine with damaged or removed protection

devices.

z Make sure that there is adequate distance between your feet

and the working tools.

z When starting the engine do not tilt the machine, unless the

machine needs to be lifted during this process. In this case tilt

only as much as necessary, and only lift the side away from

the operator.

z Never put your hands or feet near the rotating parts.

z Always keep away from the ejection opening.

z Never lift or carry the machine when the engine is running.

z Stop the engine and remove the sparking plug lead:

– before removing blockages or obstruction in the ejection

channel,

– before checking the machine, cleaning it or doing work on

the machine

– if foreign bodies are struck. Check the machine for damage

and undertake the required repair before re-starting and

working with the machine

– if the machine starts to vibrate excessively.

– when leaving the machine.

– before filling up with petrol.

Maintenance and storage

1 Caution! Rotating blades

Before all maintenance and cleaning tasks:

z Remove the sparking plug lead.

z Take care not to grab running cutters.

z Make sure that all nuts, bolts and screws are tightened

properly in order for you to make sure that the machine is in a

safe working condition.

z Never store the machine with petrol in the fuel tank inside a

building in which it may be possible for petrol vapour to come

into contact with fire or sparks.

z Allow the engine to cool down before storing the machine in

enclosed spaces.

z In order to prevent fire, keep the engine free from grass, straw,

moss, leaves or escaping grease.

z Check the machine regularly and replace worn or damaged

parts for safety's sake.

z If the fuel tank needs to be emptied this should be done in the

open air.The drained fuel must be stored in a special container

for fuel or should be disposed of carefully.

Assembly

Fixing the grab handle

1 Caution!

When collapsing and unfolding the grab handle, the cable

could be damaged.

z Take care that you do not kink the electrical cable and

the Bowden cable.

z Fold the grab handle down in accordance with the

illustration and tighten it in place with the wing nuts.

Operation

Operating times

z Please observe the regional regulations.

z Request the operating times from your local authorities.

Topping up the oil

z Please check the oil level before scarifying.

z Before using for the first time, you must add 0.6 l. VO-4T four-

stroke oil up to the mark.

Filling with fuel

1 Caution! Rotating blades

Settings only to be carried out on the machine with the

motor switched off and with the working tools at a standstill.

z Switch the motor off and pull off the sparking plug lead.

z Use only normal lead-free petrol (not Super unleaded).

z Avoid spilling petrol.

z Do not inhale the vapour.

Setting the working depth

1 Caution!Rotating blades

Settings only to be carried out on the machine with the

motor switched off and with the working tools at a standstill.

z switch the motor off and pull off the sparking plug lead.

3 Recommendations on working depth:

prepared areas with stone-free, soft ground conditions

z Match the working depth exactly to ground level

(factory setting)

stony, unkempt areas

z Set the working tools to ground level

z If stones are thrown up, set a reduced working depth

rough ground, very mossy ground

z start with a small working depth

z do not overload the machine (if the motor stalls use a

smaller working depth)

z scarify several times at right angles

z re-seed with WOLF Lawn Seed (e.g. "Loretta")

1. Put the setting lever back into the transport position

(1)

2. Increasing the working depth (cutters towards the

ground)

(1)

Turn the handwheel "Working Depth Adjustment" to the left.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten UV 35 B in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

WOLF-Garten UV 35 B Manual

Product: