Manual WOLF-Garten UV 32 EV (page 12 of 90) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian)

78307

Zoom out

Zoom in

1/90

Operation

Operating times

z Please check noise abatement regulations prevailing in your

country.

Feed cable through the strain relief

z Please feed cable through the strain relief.

Connecting to the mains (230 Volts, A.C., 50 Hz)

z The mower operates from any normal household mains sup-

ply, provided with a 16 Amps. fuse.

3 Note: Residual current protection device

These protection devices safeguard while touching

damaged wires, from insulation flaws and in certain cases,

also while damaging live wires.

z We recommend that the equipment only be plugged into

a power socket, which is protected by a residual current

protection device (RCD) with a residual current of not

more than 30 mA.

z Retrofit kits are available for old installations. Consult an elec-

trician.

Adjust operating depth

Only with motor switched off and non-mowing aeriating roller. The

operating depth must be adjusted to the corresponding grass and

ground conditions.

z Move operating lever towards front (1).

Increasing the working depth (cutters towards the

ground) (1)

– Turn the handwheel "Working Depth Adjustment" to the

right

Reducing the working depth (2)

– Turn the handwheel "Working Depth Adjustment" to the left.

(One turn = 1.5 mm working depth)

3 Aeriating test:

z Pull operating lever up again (2)

z Start tool

z Push operating lever slowly forward (1)

z Move tool slowly into operating direction

z On hearing stones being hit or blocking of the motor im-

mediately switch off tool

z Turn rotating handle 1–2 rotations towards the left

(2).

z Start aeriating test again

z When used regularly the aeriating depth may be adjusted ac-

cording to the wear of the blade (+).

Recommended working heights

z well kept lawns with stone-free, soft ground

– Set tool exactly to ground height

z stony, untidy lawns

– Set tool to ground height

– Increase working height if stones are thrown up

z unkempt, extremely mossy lawns

– Start with a high working height

– Do not overload appliance (reduce working height if motor

blocks)

– Cut vertically and crossways several times

– Re-saw with WOLF-Garten >>Loretta<< lawn seeds

Scarifying

1. Depress button (1) and hold.

2. Lift up bar (2) and release button

(1).

3. Place lever (1) slowly into forward position.

4. Switch-off motor: Release bar

(2).

1 Important:

Place the cable firmly off the lawn or on the already cut side

of the lawn when starting to mow.

3 Turning (UV 32 EV / UV 34 E)

The cable relief holder enables you to move the cable from one

side of the handle frame to the other. Thus you ensure that the

cable always trails on the ride of the lawn already cut – and not

in front of the machine .

Maintenance

General

1 Attention! Rotary cutter blade

Before all maintenance and cleaning work:

z pull out the power plug.

z Do not touch running blades.

Cleaning

z Clean the unit thoroughly with a brush after each use.

z Do not spray with water.

z Store unit in a dry room.

3 We recommend

Allow a WOLF-Garten-service centre to check the unit in the au-

tumn.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten UV 32 EV in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 1,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

WOLF-Garten UV 32 EV Manual

Product: