517921
15
Zoom out
Zoom in
Previous page
1/158
Next page
15
G
3 General instructions regarding the bat-
tery:
To prolong the service life of the battery,
observe the following instructions:
z The LI-ION POWER RR 3000 is auto-
matically switched off when the battery
voltage is low. In such a case, rechar-
ge the battery.
z The lithium iron battery must also be
recharged before prolonged periods of
non-use, for example at the beginning
of winter.
z The charging time for completely flat li-
thium ion batteries is 30 minutes.
z The charging time is increased, if the
battery is charged at a temperature
outside the recommended range.
z The lithium ion battery can be rechar-
ged at any charge level, and charging
can be interrupted and resumed
without any damage to the battery (no
memory effect).
Working with the secateurs
1 Caution! Sharp cutting edges!
z Keep your hands out of the cutting ran-
ge. .
z Ensure that you are standing on firm
ground, especially when working abo-
ve head height.
z Keep the blade away from your body.
Prepare the secateurs for operation.
z Place the battery in the tool as shown in fi-
gure
Switch on the secateurs
3 The LI-ION POWER RR 3000 is suitable
for both right-handed and left-handed
users.
1. Press and hold the release switch
(1).
2. Press the ON/OFF switch (2).
3. Release the release switch.
3 If the ON/OFF switch remains pressed,
the blades open and close continuous-
ly, whereby the blade remains open for
approx. 0.8 seconds before it closes
again.
Switch off the secateurs
z Release the ON/OFF switch (2).
3 As soon as the tool is switched off, the
blades are opened.
Blade protection
3 The blade protection reduces the risk
of injury.
z Place the blade on the branch to be cut
(1).
z The blade protection is automatically
pushed upwards (2).
Overload protection
3 In the event of an overload or blocka-
ge, the blades open and the motor is
automatically switched off!
z Disconnect the battery and eliminate
the cause!
z After the cause of the overload has
been eliminated, the secateurs can be
switched on again.
Cutting tips
1 Caution! Sharp cutting edges!
Hold the branch with your free hand. En-
sure that this hand is well clear of the cut-
ting range. .
3 Pruning times:
z Deciduous hedges: May/June and Oc-
tober (cut back by approx. 1/3 of the to-
tal height during winter)
z Coniferous hedges: April and October
z Conifers: April and October
z Floribunda roses: April/May
z Spring-flowering plants: May/June
z Soft fruit plants: January/February, Ju-
ly/August, November/December
z Trees: Mid of October to end of De-
cember
Maintenance
General instructions
1 Caution! Sharp cutting edges!
Before carrying out any maintenance or
cleaning work:
z Remove the battery .
z Do not touch the moving blade.
Cleaning
z Clean the tool after every use with a dry cloth.
if necessary, use a brush to remove persis-
tent dirt.
z Never clean the tool with a water jet.
F
B
C
C
C
C
E
E
F
D
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WOLF-Garten RR 3000 LI-ION POWER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten RR 3000 LI-ION POWER in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info