Manual WOLF-Garten Power Edition 40 E-1 (page 14 of 38) (English, German, Dutch, French, Italian)

638185

Zoom out

Zoom in

1/38

Connecting to the mains (230 Volts, A.C., 50 Hz)

z The mower operates from any normal household mains supp-

ly, provided with a 16 Amps. fuse.

3 Note: Residual current protection device

These protection devices safeguard while touching

damaged wires, from insulation flaws and in certain cases,

also while damaging live wires.

z We recommend that the equipment only be plugged into

a power socket, which is protected by a residual current

protection device (RCD) with a residual current of not

more than 30 mA.

z Retrofit kits are available for old installations. Consult an

electrician.

Starting and Stoping

z Switch on motor with mowerplaced on level and firm ground.

z not in high grass - alternatively tilt slightly .

Switch-on motor

1. Depress button and hold (1).

2. Lift up bar (2).

3. Release bar (1).

Wheel drive on (Power Edition 40 EA-1)

z Raise drive bracket (3).

z Set speed.

– 1st gear B5 (4) = slow (2 km/h).

– 2nd gear B5 (5) = fast (4 km/h).

Wheel drive off (Power Edition 40 EA-1)

z Release drive bracket (3).

Switch-off motor

z Release bar (2).

Tips for mowing

z To prevent strips of grass from being left unmowed, the cutting

paths must always overlap a few centimeters .

z Always let cable trail on the cut side of the lawn.

Cut / Collect

Activate cut/collect function

1 Attention! Rotary cutter blade

Undertake adjustments on the equipment only after the

motor is switched off and the cutting tool has come to a

standstill.

z Do not start the motor until your feet are at a safe

distance from the cutting tool.

1. Remove the grass collecting bag.

2. Turn the switch to “CUT/COLLECT”.

3. Hang up the collection bag if necessary.

4. Start the motor.

Hang up collection bag

1 Attention! Rotary cutter blade

Undertake adjustments on the equipment only after the

motor is switched off and the cutting tool has come to a

standstill.

1. Lift the protective flap.

2. Hang the grass bag in the chassis with the hooks in the reces-

ses (see arrow).

3. Replace the protective flap.

Emptying of Grassbox

When the collection bag is full, the flap lowers by itself .

1 Attention! Rotary cutter blade

Undertake adjustments on the equipment only after the

motor is switched off and the cutting tool has come to a

standstill.

z Empty collection bag.

z Remove potential blockages in the cutting space before

starting.

3 Instructions for level indicator:

For an efficient functioning of the level indicator, regularly

clean the holes under the level indicator in the collection

bag with a hand brush.

Mulch

„Mulching“ is a process in which the grass is finely chopped by a

special cutting system and then deposited on the ground. The re-

sult is that the grass does not have to be collected and disposed

of. „Mulching“ also prevents the lawn from drying out.

3 Instructions for mulching

We recommend:

z Depending on the growth of grass, mulch 1 – 2 x per

week

z The grass should not be too high nor too wet!

z Go slow while mulching

z Take care that the blade channels do overlap.

z Do not cut grass more than 20 mm.

3 Note:

Mulching is not advisable in case of moss-affected or

entangled grass, because the cut material stays on the

moss surface and/or entanglement and thus cannot be

absorbed by the ground.

z Regularly scarify and manure the lawn.

Activating the mulch function

1 Attention! Rotary cutter blade

Undertake adjustments on the equipment only after the

motor is switched off and the cutting tool has come to a

standstill.

z Do not start the motor until your feet are at a safe dis-

tance from the cutting tool.

1. Remove the grass collecting bag.

2. Set the switch to „MULCH“.

3. Start the motor.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten Power Edition 40 E-1 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

WOLF-Garten Power Edition 40 E-1 Manual

Product: