799090

WOLF-Garten LYCOS 40-600 H Manual

23
Zoom out
Zoom in
Previous page
1/177
Next page
Servicing
23
EN
3The handle engages in the next locking
position 2.
ÎTo rotate the handle further, pull the locking
lever 1 again.
Switching the device on B
ÎWith one hand maintain the on/o󰀨 switch on the
handle depressed 1.
ÎThen with the other hand simultaneously press the
on/o󰀨 switch on the bow-shaped handle 2.
3The device is in operation.
ÎPress the eco button 3.
3The speed of the cutting blade reduces. The lamp
on the eco button goes green.
Note
Eco mode extends device running time by
about 50% and can be used to cut thinner
branches and twigs. Eco mode remains
active after switching the device o and on.
To switch eco mode o, the eco button must
be pressed again so that the device can
work in normal mode (fast cutting blade
speed).
Cutting D EF
Cutting the top of the hedge D
- To cut the hedge top, perform swinging/sweeping
movements to the left and right using the hedge
trimmer.
- For optimum cutting results, maintain the cutting
blade in a slightly inclined position in the direction
of the cutting movement.
Cutting the hedge sides E
- If the hedge sides are to be cut, start at the bottom
part of the hedge and cut upwards.
- For optimum cutting results, maintain the cutting
blade in a slightly inclined position in the direction
of the cutting movement.
- Cut the sides of the hedge so that the hedge nar-
rows towards the top. This ensures uniform hedge
growth.
Cutting tips
- Please remember the breeding season of birds!
- The ideal shape for hedge cutting is trapezoidal,
which allows enough light and air to reach all parts
of the hedge F.
- To promote thick growth in young hedges new
shoots should only be shortened by half.
- If the hedge has already reached your desired
height, now shoots can be completely removed.
- To obtain a uniform hedge height, you can tension
a guide line at the desired height and then cut
along this line.
Cutting times
Deciduous hedges May/June and October (per-
form pruning by about 1/3 of
the total height in winter)
Evergreen hedges April and October
Conifers April and October
Switching the device off B
3The device switches o󰀨 as soon as you release
either of the two on/o󰀨 switches1or2.
Remove the power pack G
ÎPress the power pack release 1.
ÎRemove the power pack 2.
Servicing
WARNING!
Risk of injuries or material damage.
¾Only clean or service the device if the
motor is stationary and also the cutting
tool.
¾Always remove the power pack prior to
working on the device.
¾Repair and service work as well as the
replacement of safety elements must
be performed by a qualied expert or
workshop.
Cleaning
ÎClean the hedge trimmer after every use, espe-
cially the ventilation slots, using a dry cloth or, in
the event of heavy soiling, a brush.
ÎCarefully clean the cutting blade after each use.
ÎAfter use, spray the cutting blade with conditioning
oil to ensure a long service life for the hedge
trimmer. Where possible, use an environmental-
ly-friendly lubricant.
ÎDo not oil the hedge trimmer during use.
ÎTo oil the hedge trimmer, place it on its side and
apply a thin oil lm to the cutting blade.
ÎDuring extended periods of hedge cutting, inter-
rupt your work frequently to oil the hedge trimmer
cutting blade.
Attention!
Do not clean the device with water.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WOLF-Garten LYCOS 40-600 H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten LYCOS 40-600 H in the language / languages: All languages as an attachment in your email.

The manual is 17.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info