799053

WOLF-Garten LYCOS 40-370 M Manual

24
Zoom out
Zoom in
Previous page
1/241
Next page
Intended use
24
EN
Intended use
This lawnmower is intended solely
- for mowing lawns in domestic and hobby gardens,
- for use in accordance with the descriptions and
safety information given in this operating manual.
Any other use is classed as an unintended use.
The user is liable for any damage arising from unin-
tended use.
Identi¿cation plate
Position
The identi¿cation plate is located at the lawnmower
casing.
Note
The identi¿cation is considered as a docu-
ment. It must neYer be altered or obliterated.
Structure
1 Guaranteed sound level
2 CE label
3 Manufacturer
4 Device group
5 Model name
6 Model number
7 Serial number
8 Power
9 Motor speed in rpm
10 Weight
11 Rated voltage, current type
12 Protection class / IP code
13 Disposal instruction
14 Year of manufacture
Assembly
Attaching the handle
(Fig. A@>=?<7;,
)
Attention!
When folding the handle together or folding the
handle out, the cable may be damaged. Ensure
that the cable is not kinked or squeezed.
ÎGrip in the handle recess of the deÀector
Àap @$ and pull the deÀector Àap upwards until
the hook on the rear side of the casing and the
hook on the underside of the deÀector Àap engage
with a loud click @%.
ÎThen lower the deÀector Àap again @'.
3The grass is easily ejected through the resulting
gap between the deÀector Àap and the casing
when mowing without the grass collector. <ou
can ¿nd more information in the section “Mowing
without the grass collector´.
ÎNow ¿x both handle mountings Ato the bottom
part of the handle A, see >$.
ÎAttach the bottom part of the handle to the handle
mountings so that it clicks in >%. Push the
handle up to the end of the handle mounting >'.
ÎSlightly pull the bottom part of the handle apart at
its ends and push onto the threaded screws lo-
cated on the left and right side of the casing=$.
ÎThen position the two washers A on the
threaded screws= %.
ÎPush the threaded pins A into the quick-release
levers A, until the hole is visible ?$. Hold
these tightly with ¿nger and thumb and screw
in the quick-release levers together with the
threaded pins in a clockwise direction ?% until
there is a gap of approximately 10 mm ?'.
ÎSecure the bottom part of the handle, by folding
the quick-release levers upwards towards the
lawnmower ?#.
ÎAttach the top part of the handle A, by posi-
tioning it on the bottom part of the handle <$.
Hold the top part of the handle ¿rmly with one
hand and with the other hand insert the screw A
from outside into the holes at the left side of the
handle <%.
ÎPosition the washer A on the screw from the
other side <'.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WOLF-Garten LYCOS 40-370 M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten LYCOS 40-370 M in the language / languages: All languages as an attachment in your email.

The manual is 9.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info