638325
13
Zoom out
Zoom in
Previous page
1/132
Next page
13
G
z Avoid inadvertent start-up of the electric
tool. Ensure that the electric tool is swit-
ched off before carrying it or disconnec-
ting/connecting it to the power supply
(mains or battery). When carrying the electric
tool, do not place your finger on the switch and
do not connect it to the power source while it is
switched on, as this could cause injury.
z Before switching on the electric tool, remo-
ve all adjusting tools such as spanners,
etc. Tools or spanners left on a rotating part
can cause injury.
z Avoid unnatural postures. Ensure that you
are standing on firm ground and avoid a
posture where you could lose your balan-
ce. This ensures that you will be able to control
the electric tool even in unexpected situations.
z Wear suitable clothing. Do not wear loose
clothing or jewelry. Keep your hair,
clothing and gloves away from moving
parts. Loose clothing and jewelry and long
hear can be caught in moving parts.
Proper use of electric tools
z Do not exceed the maximum load of the
tool. Use the tool only for the intended pur-
pose. To ensure safe and efficient working,
operate the electric tool only within the speci-
fied power range.
z Do not use electric tools whose switches
are defective. Electric tools that cannot be
properly switched on or off are dangerous and
must be repaired without delay.
z Before adjusting the tool, changing acces-
sory parts or putting the tool away for sto-
rage, disconnect the power plug from the
socket or remove the battery. This safety
measure reduces the risk of inadvertent tool
start.
z Store the electric tool outside the reach of
children. Do not allow persons who have
not read these instructions to operate the
tool. When operated by inexperienced per-
sons, electric tools can be very dangerous.
z Handle the electric tool with care and ser-
vice it regularly. Ensure that all moving
parts can work properly and are not jam-
med and regularly inspect the tool for de-
fective or damaged parts that might impair
its function. Have damaged parts repaired
before you start the tool. Many accidents are
caused by insufficiently maintained electric
tool.
z Keep the cutting parts sharp and clean. Ca-
refully maintained cutting tools with sharp cut-
ting edges will rarely get jammed and are
easier to operate.
z When using the electric tool, the accesso-
ries and replacement parts, strictly adhere
to the instructions in this manual. Take into
account the actual working conditions and
the task in hand. The use of electric tools for
purposes other than the intended can lead to
dangerous situations.
Proper use of battery-powered tools
z Recharge the battery only with chargers
that have been specifically recommended
by the manufacturer. If a different charger is
used, there is a risk of fire.
z Operate the electric tool only with the bat-
tery provided for this task. The use of other
batteries can lead to injury or fire.
z Ensure that the battery is never in contact
with metal objects such as paper clips,
coins, keys, nails or screws, as they could
short-circuit the contacts. Short-circuiting
the battery contact can lead to fire and injury
from burns.
z If the battery is used incorrectly, fluid might
leak out. Avoid contact with the fluid. In
event of accidental contact, rinse with wa-
ter. In case of fluid contact with the eyes,
consult a doctor. Leaking battery fluid can
cause irritation of the skin and burns.
Service
z If the electric tool needs to be repaired,
have the repair carried out by specialist
personnel and instruct them to use only
original spare parts. This ensures the opera-
tional safety of the equipment.
Tool-specific safety instructions
z Check the tool to ensure that all mounted parts
are properly secured and inspect it for damage
and excessive wear. Do not operate the tool if
the blade protection is damaged.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WOLF-Garten Li-Ion Power RR-T 6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten Li-Ion Power RR-T 6000 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Norwegian, Finnish as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info