Manual WOLF-Garten Li-Ion Power RR 2000 (page 11 of 126) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Norwegian, Finnish)

638341

Zoom out

Zoom in

1/126

z Do not carry or suspend the tool by the

power cable and do not pull the cable to

disconnect the plug from the socket.

Keep the cable away from heat sources,

oil, sharp edges and moving tool parts.

Damaged or entangled cables increase the

risk of electric shock.

z When using the electric tool outdoors,

use only extension leads that are desi-

gned for outdoor use. The use of extension

leads designed for outdoor use reduces the

risk of electric shock.

z If it is not possible to avoid using the elec-

tric tool in a wet environment, use a fault

current circuit breaker. The use of a fault

current circuit breaker reduces the risk of

electric shock.

Personal safety

z When working with the electric tool, ensu-

re that your full attention is on the task in

hand, do not let yourself be distracted and

apply common sense. Do not use the

electric tool when you are tired, or when

you are under the influence of drugs alco-

hol or medication. Even brief moments of

inattention can lead to serious injury.

z Wear personal protective equipment and

protective goggles. Wearing personal pro-

tective equipment such as dust mask, safety

footwear, hard hat and hearing protection re-

duces the risk of injury. Whether this equip-

ment is necessary depends on the type of the

electric tool.

z Avoid inadvertent start-up of the electric

tool. Ensure that the electric tool is swit-

ched off before carrying it or disconnec-

ting/connecting it to the power supply

(mains or battery). When carrying the elec-

tric tool, do not place your finger on the switch

and do not connect it to the power source

while it is switched on, as this could cause in-

jury.

z Before switching on the electric tool, re-

move all adjusting tools such as span-

ners, etc. Tools or spanners left on a rotating

part can cause injury.

z Avoid unnatural postures. Ensure that

you are standing on firm ground and avo-

id a posture where you could lose your

balance.

This ensures that you will be able to control

the electric tool even in unexpected

situations.

z Wear suitable clothing. Do not wear loose

clothing or jewelry. Keep your hair, clo-

thing and gloves away from moving parts.

Loose clothing and jewelry and long hear can

be caught in moving parts.

z When using tools with dust extraction and

collection devices, ensure that they are

properly mounted.

The use of dust extraction devices helps

reduce the production of dust in the working

area.

Proper use of electric tools

z Do not exceed the maximum load of the

tool. Use the tool only for the intended

purpose. To ensure safe and efficient wor-

king, operate the electric tool only within the

specified power range.

z Do not use electric tools whose switches

are defective. Electric tools that cannot be

properly switched on or off are dangerous

and must be repaired without delay.

z Before adjusting the tool, changing ac-

cessory parts or putting the tool away for

storage, disconnect the power plug from

the socket or remove the battery. This sa-

fety measure reduces the risk of inadvertent

tool start.

z Store the electric tool outside the reach of

children. Do not allow persons who have

not read these instructions to operate the

tool. When operated by inexperienced per-

sons, electric tools can be very dangerous.

z Handle the electric tool with care and ser-

vice it regularly. Ensure that all moving

parts can work properly and are not jam-

med and regularly inspect the tool for de-

fective or damaged parts that might

impair its function. Have damaged parts

repaired before you start the tool. Many

accidents are caused by insufficiently main-

tained electric tool.

z Keep the cutting parts sharp and clean.

Carefully maintained cutting tools with sharp

cutting edges will rarely get jammed and are

easier to operate.

z When using the electric tool, the accesso-

ries and replacement parts, strictly ad-

here to the instructions in this manual.

Take into account the actual working con-

ditions and the task in hand. The use of

electric tools for purposes other than the in-

tended can lead to dangerous situations.

Proper use of battery-powered tools

z Recharge the battery only with chargers

that have been specifically recommended

by the manufacturer. If a different charger is

used, there is a risk of fire.

z Operate the electric tool only with the bat-

tery provided for this task. The use of other

batteries can lead to injury or fire.

7293200.book Seite 11 Dienstag, 17. November 2009 6:44 06

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten Li-Ion Power RR 2000 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Norwegian, Finnish as an attachment in your email.

The manual is 3,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

WOLF-Garten Li-Ion Power RR 2000 Manual

Product: