638206
16
Zoom out
Zoom in
Previous page
1/202
Next page
16
G
z Do not use the electric tool in explosive
atmospheres containing flammable
liquids, gases or dusts. Electric tools might
generate sparks that can ignite dust or vapors.
z Keep electric tools away from children and
do not operate them when other persons
are standing near you. When distracted, you
might lose control over the tool.
Electric safety
z Protect all electric tools against rain and
dampness. There is an increased risk of
electric shock, if water enters the electric tool.
Personal safety
z When working with the electric tool, ensure
that your full attention is on the task in
hand, do not let yourself be distracted and
apply common sense. Do not use the
electric tool when you are tired, or when
you are under the influence of drugs
alcohol or medication. Even brief moments
of inattention can lead to serious injury.
z Wear personal protective equipment and
protective goggles. Wearing personal
protective equipment such as dust mask,
safety footwear, hard hat and hearing
protection reduces the risk of injury. Whether
this equipment is necessary depends on the
type of the electric tool.
z Avoid inadvertent start-up of the electric
tool. Ensure that the electric tool is
switched off before carrying it or
disconnecting/connecting it to the power
supply (mains or battery). When carrying the
electric tool, do not place your finger on the
switch and do not connect it to the power
source while it is switched on, as this could
cause injury.
z Before switching on the electric tool,
remove all adjusting tools such as
spanners, etc. Tools or spanners left on a
rotating part can cause injury.
z Avoid unnatural postures. Ensure that you
are standing on firm ground and avoid a
posture where you could lose your
balance. This ensures that you will be able to
control the electric tool even in unexpected
situations.
z Wear suitable clothing. Do not wear loose
clothing or jewelry. Keep your hair,
clothing and gloves away from moving
parts. Loose clothing and jewelry and long
hear can be caught in moving parts.
Proper use of electric tools
z Do not exceed the maximum load of the
tool. Use the tool only for the intended
purpose. To ensure safe and efficient
working, operate the electric tool only within
the specified power range.
z Do not use electric tools whose switches
are defective. Electric tools that cannot be
properly switched on or off are dangerous and
must be repaired without delay.
z Before adjusting the tool, changing
accessory parts or putting the tool away for
storage, disconnect the power plug from
the socket or remove the battery. This
safety measure reduces the risk of inadvertent
tool start.
z Store the electric tool outside the reach of
children. Do not allow persons who have
not read these instructions to operate the
tool. When operated by inexperienced
persons, electric tools can be very dangerous.
z Handle the electric tool with care and
service it regularly. Ensure that all moving
parts can work properly and are not
jammed and regularly inspect the tool for
defective or damaged parts that might
impair its function. Have damaged parts
repaired before you start the tool. Many
accidents are caused by insufficiently
maintained electric tool.
z Keep the cutting parts sharp and clean.
Carefully maintained cutting tools with sharp
cutting edges will rarely get jammed and are
easier to operate.
z When using the electric tool, the
accessories and replacement parts, strictly
adhere to the instructions in this manual.
Take into account the actual working
conditions and the task in hand. The use of
electric tools for purposes other than the
intended can lead to dangerous situations.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WOLF-Garten Li-Ion Power CSA 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten Li-Ion Power CSA 700 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Norwegian, Finnish as an attachment in your email.

The manual is 3,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info