Manual WOLF-Garten LI-ION POWER BS 80 (page 10 of 94) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Norwegian, Finnish)

484204

Zoom out

Zoom in

1/94

z If it is not possible to avoid using the electric tool in a wet

environment, use a fault current circuit breaker. The use of

a fault current circuit breaker reduces the risk of electric shock.

Personal safety

z When working with the electric tool, ensure that your full

attention is on the task in hand, do not let yourself be

distracted and apply common sense. Do not use the electric

tool when you are tired, or when you are under the influence

of drugs alcohol or medication. Even brief moments of

inattention can lead to serious injury.

z Wear personal protective equipment and protective

goggles. Wearing personal protective equipment such as dust

mask, safety footwear, hard hat and hearing protection reduces

the risk of injury. Whether this equipment is necessary depends

on the type of the electric tool.

z Avoid inadvertent start-up of the electric tool. Ensure that

the electric tool is switched off before carrying it or

disconnecting/connecting it to the power supply (mains or

battery). When carrying the electric tool, do not place your finger

on the switch and do not connect it to the power source while it

is switched on, as this could cause injury.

z Before switching on the electric tool, remove all adjusting

tools such as spanners, etc. Tools or spanners left on a

rotating part can cause injury.

z Avoid unnatural postures. Ensure that you are standing on

firm ground and avoid a posture where you could lose your

balance. This ensures that you will be able to control the electric

tool even in unexpected situations.

z Wear suitable clothing. Do not wear loose clothing or

jewelry. Keep your hair, clothing and gloves away from

moving parts. Loose clothing and jewelry and long hear can be

caught in moving parts.

z When using tools with dust extraction and collection

devices, ensure that they are properly mounted. The use of

dust extraction devices helps reduce the production of dust in

the working area.

Proper use of electric tools

z Do not exceed the maximum load of the tool. Use the tool

only for the intended purpose. To ensure safe and efficient

working, operate the electric tool only within the specified power

range.

z Do not use electric tools whose switches are defective.

Electric tools that cannot be properly switched on or off are

dangerous and must be repaired without delay.

z Store the electric tool outside the reach of children. Do not

allow persons who have not read these instructions to

operate the tool. When operated by inexperienced persons,

electric tools can be very dangerous.

z Handle the electric tool with care and service it regularly.

Ensure that all moving parts can work properly and are not

jammed and regularly inspect the tool for defective or

damaged parts that might impair its function. Have

damaged parts repaired before you start the tool. Many

accidents are caused by insufficiently maintained electric tool.

z Keep the cutting parts sharp and clean. Carefully maintained

cutting tools with sharp cutting edges will rarely get jammed and

are easier to operate.

z When using the electric tool, the accessories and

replacement parts, strictly adhere to the instructions in this

manual. Take into account the actual working conditions

and the task in hand. The use of electric tools for purposes

other than the intended can lead to dangerous situations.

Use and handling of the cordless device

z Only use the charger 7266078 recommended by the

manufacturer.

z Improper use can lead to leakages from the rechargeable

battery. Avoid contact with the fluid. In case of accidental

contact with battery fluid, rinse with water. In case of

contact with the eyes please seek medical assistance.

Leaking battery fluid can lead to skin irritations or burns.

z The device must not be opened and the rechargeable battery

not be removed. Injury and fire hazard.

Service

z If the electric tool needs to be repaired, have the repair

carried out by specialist personnel and instruct them to use

only original spare parts. This ensures the operational safety

of the electric tool.

Tool-specific safety instructions for shrub shears

z Keep all body parts away from the cutting blade. Never

attempt to remove any cuttings or hold material to be cut

while the blade is still running. Do not remove cuttings that

have become stuck unless the tool is switched off. A

moment of carelessness while using the battery-powered

shears may cause serious injury.

z Only carry the hedge shear by its handle and if the blade is

standing still. Always slip on the protective cover when

transporting or storing the battery-powered shears.

Handling the tool carefully reduces the risk of injury caused by

the blade.

z Only use the battery-powered shears together with Accu BS EM

shearing blades as intended for private purposes and to tend to

bushes, hedges, and shrubs.

Tool-specific safety instructions for lawn shears

z Only use the battery-powered shears together with Accu 8 EM /

10 EM as intended for private purposes and to tend to the edges

of lawns and smaller lawn surfaces.

z Before starting to trim lawn surfaces or edges, clean the lawn of

any foreign objects such as branches, stones, wire, etc.

z Use the tool only in daylight or sufficient artificial lighting.

General safety instructions for using lawn, contour,

and shrub shears

z Do not use the battery-powered shears for composting purposes

due to the risk of bodily harm to the user.

z You should refrain from using the battery-powered shears on

public grounds, in parks, sports facilities, on roads, etc. as well

as for agricultural / forestry purposes.

z Work at a height where you do not run the risk of the blade

coming into contact with the ground.

z Do not switch on the tool until your hands and feet are far

enough away from the cutting blades.

z Please note that there is always a risk of injury due to residual

charge when switching on the device even after it has been

discharged.

z These tools are not intended to be used by persons with

insufficient experience and/or lack of skills or persons with

limited physical, sensory or mental abilities unless these

persons are supervised or instructed on the use of the tools by

a person responsible for the safety of these persons.

z Young adults below the age of 16 may not use the tools.

Maintenance

z Do not clean or carry out any maintenance work on the tool until

after you switch the motor off and pull the mains plug.

z Clean and oil the blades (we recommend using WD-40 multi-

purpose oil) after each use.

z Use the blade guard to sheath the cutting unit before transport

and storage.

z Further maintenance tasks than the ones described in this

manual must only be carried out by the manufacturer or their

representative.

Charger

z Do not connect the charger to the power socket if it has become

wet or damp.

z Use the charger in dry rooms only.

z Disconnect it from the power supply by removing the plug from

the socket. Do not pull the plug by the cable as this could

damage the equipment so that its electrical safety might be

impaired.

z Never use the charger, if there is visible damage to the cable,

the plug or the charger itself. In this case, have the charger

repaired at a specialized workshop.

z Never open the charger housing. In the event of malfunction,

have the charger repaired by a specialized workshop.

z Do not charge the battery-powered shears while using them.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten LI-ION POWER BS 80 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Norwegian, Finnish as an attachment in your email.

The manual is 2,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

WOLF-Garten LI-ION POWER BS 80 Manual

Product: