457617

WOLF-Garten LI-ION POWER 40 Manual

16
Zoom out
Zoom in
Previous page
1/130
Next page
16
G
3 Note:
Mulching is not advisable in case of moss-affected or
entangled grass, because the cut material stays on the
moss surface and/or entanglement and thus cannot be
absorbed by the ground.
z Regularly scarify and manure the lawn.
Activating the mulch function
1 Attention! Rotary cutter blade
Undertake adjustments on the equipment only after the
motor is switched off and the cutting tool has come to a
standstill.
z Do not start the motor until your feet are at a safe distan-
ce from the cutting tool.
1. Remove the grass collecting bag.
2. Set the switch to „MULCH“.
3. Start the motor.
Maintenance
General
1 Caution! Rotating blade
Before carrying out any maintenance or cleaning work:
z Remove the contact key.
z Remove the battery.
z Do not touch rotating blades.
Cleaning
z Clean mower thoroughly after each mowing with cloth or
brush.
z Never spray the mower with water.
z Clean the mulch flap at regular intervals with a small broom
(LI-ION POWER 37, LI-ION POWER 40) .
Winter Storage
z Clean mower thoroughly before storing away.
z Have your mower thoroughly checked once a year by an ap-
proved Service Centre.
z Do not store it in a wet or humid place.
z The Lithium iron battery must also be recharged before pro-
longed periods of non-use, for example at the beginning of
winter.
Blade change
1 Caution! Rotating blade
Before carrying out any maintenance or cleaning work:
z Remove the contact key.
z Remove the battery.
z Do not touch rotating blades.
z Wear protective gloves.
1 Attention!
An unbalance can develop after regrinding of the blade.
z Always regrind the blades in a specialist workshop, be-
cause an unbalance check should be undertaken accor-
ding to the safety regulations.
z Always change blades in a specialist workshop. A torque
spanner of 10 mm is mandatorily required. Fastening torque
of the screws: 6 - 7 N-m (LI-ION POWER 34, LI-ION POWER
37).
z Always change blades in a specialist workshop. A torque
spanner of 13 mm is mandatorily required. Fastening torque
of the screws: 16-18 N-m (LI-ION POWER 40).
z Use only original WOLF spare parts.
Faults and how to remedy
U
V
W
Problem Possible causes
Remedy
Jerky run, machine
heavily vibrating
• Blade damaged • Contact WOLF Service workshop
• Blade loose • See page 16 (Blade change)
Motor fails to start
• Battery flat • See page 14 (Charging the battery)
• Battery defective • See page 17 (Spare parts)
• Contact key not inserted • See page 14 (General)
Poor
cutting/catching
performance
• Blade blunt • Contact WOLF Service workshop
• Bag blocked • See page 15 (Emptying of Grassbox)
• Incorrect cutting height • See page 15 (Set cut height)
• Battery defective • See page 17 (Spare parts)
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WOLF-Garten LI-ION POWER 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten LI-ION POWER 40 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Norwegian, Finnish as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info