638276

WOLF-Garten HSG 55 Manual

36
Zoom out
Zoom in
Previous page
1/236
Next page
36
HEDGE TRIMMER USER MANUAL
GB
CAUTION! The blades continue to move
for a while after the throttle lever is
released.
WARM ENGINE STARTUP
Follow the instruction given for cold engine star-
tup, but with the choke lever in position " ".
7. OPERATION
Always grip the machine with both hands.
Operate by opening the throttle lever to
maximum.
CUTTING THE TOP OF THE HEDGE
A) Keep the machine in a horizontal position
(fig. 3).
B) The rear handle in a vertical position.
C) For safety reasons, do not use the machine
above shoulder height.
CUTTING THE SIDES OF THE HEDGE
A) For a vertical cut, move the rear handle into a
comfortable position for the hand and arm. Hold
the front handle with the side grip (see fig. 4)
POSITION OF THE REAR HANDLE
B) To change the inclination of the rear handle:
1) Release the throttle lever (fig.5 part.1)
2) Engage the rotation lock control (fig. 5 see
arrow A). Rotate the handle (fig. 5 see arrow B),
until the required angle is obtained.
3) Release the rotation lock.
4) Ensure that handle rotation is locked.
5) A safety device allows you to acti-
vate the handle rotation lock (fig. 5
part. 2) only once the throttle lever is
released.
8. MAINTENANCE AND REPAIR
DANGER! Do not carry out any
checks, maintenance and repair
operations with engine running.
SPARK PLUG
At least once a year or if the engine has problems
starting up properly, check the condition of the
spark plug. Wait for the engine to cool before
operation.
1) Remove the cap and unscrew the spark plug
with the wrench provided (fig. 6).
Check and possibly adjust the distance between
the electrodes.
If the electrodes are excessively soiled or are very
worn, replace the spark plug with an equivalent
one (fig. 7).
Excessive soiling may be due to: # The oil ratio
used in fuel is too high and/or oil is not of an ap-
propriate type.
# Air filter is partly clogged.
2) Screw the spark plug manually as far as pos-
sible to avoid damaging its socket. Use the wrench
provided only to tighten it (fig. 6).
3) Do not carry out repairs on the machine (if you
are not qualified to do so). Contact an authorised
service centre.
4) GEARBOX (fig. 8)
Add grease to the gearbox every 40 hours of
operation by using the appropriate grease nipple
(fig. 8 part. 1).
DANGER! In order to maintain the
original safety features, do not make
any changes to the machine.
In case of repairs, only use genuine spare
parts.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WOLF-Garten HSG 55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten HSG 55 in the language / languages: All languages as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info