78399
15
Zoom out
Zoom in
Previous page
1/41
Next page
16
G
Operation
Times of operation
z Please consult regional/local regulations.
z Inquire about the operating times at your local
regulatory agency.
Feed cable through the strain relief
z Lead the cable into strain relief as indicated
(prevents accidental loosening of the plug con-
nector).
Adjust blade head
In order to ensure the same, ergonomically ideal
handling in all cutting situations the blade head has
a 5-position latching mechanism .
1 Attention! Reverse blade
Perform adjustments to the device only
when the motor is off and the blade is idle.
1. Press the locking button down.
2. Rotate the blade head into the desired posi-
tion.
3. Now release the locking button.
4. Check whether the blade head is in place (the
hedge shears can only be switched on if the
blade head is snapped in).
Connect to the socket (230 Volt, 50 Hz)
z Connect the device only to sockets that are
protected with a 10-16 Amp. fuse (or LS switch
type B)
3 Note: Residual current protection device
These safeguards provide protection against
severe injuries resulting from touching dam-
aged cables, insulation defects and in some
cases cables that conduct electricity.
z We recommend that the equipment only be
plugged into a power socket, which is protect-
ed by a residual current protection device
(RCD) with a residual current of no more than
30 mA.
z Retrofit kits are available for old installations.
Consult an electrician
Switching the hedge shears on/off
z Make sure that your hands are steady when
working above head height.
z Hold the blade away from your body.
z Never place the cable above the hedge where
it can easily be caught by the blades.
Motor on
1. Hold down the safety switch on the bowed
handle (1).
2. Press the on/off button on the hand grip (2) at
the same time.
Motor off
z Release one of the two buttons.
Tips for cutting
z Please observe the brooding season of the
birds!
z The ideal hedge cutting form is the trapezoid
, which provides for adequate light and
ventilation for all parts of the hedge.
z In order to promote thick growth of young
hedges, only half of new shoots should be cut.
z If the hedge has already reached the desired
height, new shoots can be completely re-
moved.
z In order to achieve a steady hedge height you
can string up a guide wire at the desired height
and cut along this wire.
z Cutting seasons:
Deciduous hedges: May/June and October
(cutback to approx. 1/3 of the total height in
winter)
Conifer hedges: April and October
Conifers: April and October
B
C
D
E
E
F
G
H
J
J
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WOLF-Garten HSE 55 V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten HSE 55 V in the language / languages: English, German, Dutch, Danish, French, Italian, Norwegian as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info