Manual WOLF-Garten Esprit 40 AC (page 15 of 34) (English, German, Dutch, French, Italian)

484182

Zoom out

Zoom in

1/34

Adjustment of cutting height

Only when mower is stationary and rotating blade

has come to complete standstill.

1. Press button (1).

2. push chassis downwards or pull upwards, as required.

3. Release button at required cutting height (2).

Selection of Cutting height

If possible, mow when grass is dry in order to protect turf. Do not

se cutting position too low when mowing very hight or wet grass.

We recommend an average cutting height of 4,0 - 5,0 cm.

Starting and Stoping

• Switch on motor with mowerplaced on level and firm ground

• not in high grass - alternatively tilt slightly

Switch-on motor

1. Insert the key (K, 2)

2. Depress button and hold (M, 1).

3. Lift up bar (M, 2).

4. release button (M, 1).

Switch-off motor

Release bar (2).

Hanging the grass bag

Only when the motor is not running and the

cutting blade is not moving.

1. Lift the protective ap.

2. Hang the grass bag in the chassis with the hooks in the

recesses (see arrow).

3. Replace the protective ap.

Emptying of Grassbox

• the flap drops down when grassbox is full

• To ensure properfunctioning of the indicator it is important

that the grilles beloware kept clean using a hand

brush.

Only when mower is stationary and rotating blade

has come to complete standstill.

Safety switch

In case of overload or blocking, the motor shuts down

automatically!

Remove switch key and eliminate problem.

Overload:

Cutting height is too low, or forward speed is too fast

Blocking:

Foreign object in cutting area (e.g. branches)

The machine can be switched on again after about 5 min.

Operation

This lawnmower is equipped with a soft starter

for the motor. Once the handle switch

has been actuated, the operating speed of the

motor is reached after approx. 2 seconds.

After the mower has been switched off via the

handle switch, it can only be switched on again

after a period of

approx. 5 seconds. during this period, the

braking energy released from the motor is fed

back into the battery.

It is also possible to switch on the lawnmower

when the battery electronics are not switched on.

• Always remove the switch key if you mowe

away from the lawnmower or when carrying out

maintenance work.

Checking the charge

To check the charge of the battery, set switch (1) briey on

and off. Do not leave switch (1) on.

Tips for mowing

• To prevent strips of grass from being left unmowed, the

cutting paths must always overlap a few centimeters.

• Always turn the mower on a surface that has already been

mowed.

Maintenance

Cleaning

Note: Remove switch key before cleaning or per-

forming maintenance work. Attention: Keep hands

clear of moving blade.

Clean mower thoroughly after each mowing with cloth or

brush.

Do not spray with water. Keep mower in a dry room.

Change of cutter blade

ATTENTION! Change of blades or re-sharpening

should only be carried out by an approved service

station as the work should include the proper che-

cking of the blade balance in accordance with safety regu-

lations.

For changing the cutter bar please follow illustration. Torque

wrench setting for screw 18–22 Nm.

Use original spare parts only.

Winter Storage

• Clean mower thoroughly before storing away.

• Have your mower thoroughly checked once a year by an

approved Service Centre.

• Do not store it in a wet or humid place.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten Esprit 40 AC in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

WOLF-Garten Esprit 40 AC Manual

Product: