638419
16
Zoom out
Zoom in
Previous page
1/42
Next page
Safety instructions
3. Cable:
-Alwaysuseoriginal WOLF-Safety Cable or rubber sleeved cable with a minimum diameter of 3 x1,5 mm
2
.
-Cable sockets and plugs must be of rubber or rubber sleeved in accordance with National Standard
Specifications.
-Cablesockets must be of splash-waterproof construction.
-Usearesidualcurrent device (RCD) rated for a residual current not greater than 30 mA.
-Connect cable to cable relief holder. Avoid abrasion of cable when dragging along sharp edges. Do not
squeeze cable between dooror windowframes.Never by-pass fail-safe off/on switchby tying switch lever
or bar in the “on” position, for instance.
4. Starting the Motor:
-Switchonmotor only when your feet are at a safe distance from the mower chassis and when standing
on firm ground not in high grass;
-Donot tilt the mower forward. When tilting sideways ensure that the cutter blade faces away from you.
5. During work for your Safety:
-ATTENTION DANGER! Keep hands away from rotating cutter blade and remember that the blade conti-
nues to rotate for a short while after the motor has been switched off;
-Alwayswalk behind the handle bars, holding the upper handle grip with both hands;
-Keep feet away from themower chassisand be extra careful when mowing on hills or slopes to prevent
slipping. Mow across the hill, if possible. Mowe forward at walking pace, never run;
-Avoid pulling the mower backwards (towards you) during work;
-Switchoff motor before tilting or lifting the mower and when pushing off the lawn area;
-Ensure that the grassboy or deflector plate are firmly secured in their position;
-Usetheheightadjustmentonlywhen themowerisstationaryandtherotatingbladehascometoacomplete
standstill;
-Beforeremoving the grassboxswitch offthemotorand waituntil the rotating blade has come to a complete
standstill;
-Never push mower over gravel with running motor;
-Ifpossible, avoid mowing in wet conditions;
-Switchoff motor and remove cable plug socket before working at the cutter blades, before making any ad-
justments, when cable has become entangled
a) before leaving the mower unattended,
b) before attempting to clear a blockage underneath chassis or at rear throw-out,
c) before cleaning or carrying out any checks,
d) immediately after your mower blade has hit a foreign and hard object. Check the condition of the deck
and cutter blade before switching on again,
e) immediately when yourmowerstarts to vibrate strongly.Locate the reason forthevibration andremedy.
-Ifyour mower has a power-drive do switch the power-drive off before starting motor or engine.
-Shouldthe power cordbedamaged duringuse,immediatelydisconnectitfromthe mains.Do nottouch the
cable until it has been disconnected from the mains.
6. Maintenance:
-Switchoff motor and remove key before carrying out any repairs or maintenance to your mower;
-Donot clean your mower with a hose pipe and particularly not with a high-pressure spray;
- Inspect regularly all visible nuts and bolts particularly of the cutter blade for their tightness;
- ATTENTION! Sharpening and changing of cutter blades should be done by a qualified service centre
because it is necessary that the correct balance after fixing is guaranteed;
-Damaged and worn parts must always be replaced with original WOLF replacement parts as otherwise
your guarantee will be invalidated;
-Your servicecentreshould check yourmower regularly and particularly after any hard obstacle hathitthe
chassis and/or the cutter blades;
-Storeyour mower only in a dry room.
-Ifcutter blade hits a hard foreign object whilst mowing switch of motor immediately, remove safety key
and check cutter blade carefully for damage.
Please observe these hints, as they help you to prevent damage or even accidents!
16
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WOLF-Garten Esprit 32 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten Esprit 32 E in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info