Manual WOLF-Garten Campus 440 BA (page 13 of 33) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Norwegian, Finnish)

638129

Zoom out

Zoom in

1/33

Safety instructions

•

If the mower is a self-propelled version then release the drive

clutch bail before you switch on the engine. Do not touch

engine

or exhaust during or shortly after operation. Hot parts

can lead to burns or provoke frightened movements which may

lead to injuries.

• Turn the engine off if you the leave the lawn mower unat-

tended and before you refuel.

After working

• The throttle should be closed before switching off the engine.

If the engine is equipped with a petrol shut-off valve then this

be closed after mowing has been completed.

• Do not leave the mower in closed areas after switching off -

allow it to cool off in the open air before storing away.

• Never keep the machine with petrol in the tank within a build-

ing in which gasoline vapours may possibly come into con-

tact with naked ames or sparks. Before leaving the mower

remove the spark plug lead and - if tted - the starting key.

• Lifting and carrying the mower for transport:

•

Never attempt to lift the mower with the engine running - nor with

a hot engine - always remove the spark plug lead before lifting or

carrying.

• When folding the mower handlebars, detach starter rope

and make certain that the control cables are not snagged or

stretched when folding or unfolding.

• Always carry out the engine oil change with the fuel tank

empty and ller cap tted. The engine should be warmed

up prior to draining the oil to ensure all sludge deposits are

drained away with the oil.

Maintenance

• Regularly examine all xing bolts and nuts, particularly those

of the cutter bar, for tightness.

•

Maintenance and cleaning of the equipment as well as remov-

ing the protection device may only be performed with the

engine stopped and the spark plug lead and - if available - the

starting key, removed.

Note information on the chassis before cleaning and oil change!

• Make certain that all nuts, pins and screws are rmly tight-

ened and that the unit is in a safe operating condition.

• In order to avoid the risk of re keep the engine, exhaust,

battery box and the area around the fuel tank free of grass,

leaves or oil.

• If the equipment must be tilted for maintenance work then the

fuel must be completely drained from the tank beforehand.

• Clean the equipment after each use with a hand-brush - not

with water and do not hose down with a high pressure hose

in particular. Make certain to keep the engine cooling ns and

engine cooling air intake clean and free from debris.

• Do not place the equipment in damp areas, near naked

ames or where a spark might ignite petrol vapour.

• If the fuel tank is to be emptied then this should be done out-

doors. Make sure that no fuel is spilled.

• For safety reasons replace worn out or damaged parts.

• NOTE! Always have blades replaced or sharpened by a

WOLF Service Centre, as a blade balance test must be per-

formed in accordance with safety regulations and the blade

retaining bolt must be tightened to a specied torque.

• Wear suitable work gloves when carrying out the above work,

Assembly

Fixing of handle

ATTENTION! Take care that theswitch cable does not become

caught and crused when folding the handle frame.

Mount grass catcher

See illustrations.

Starter cord assembly

1. Pull and hold the safety lever

(1).

2. Slowly pull the starter cord to the cross beam of the

handle section

3. Thread the starter cord through the loosened holder and

subsequently tighten the holder with the screw handle

(d).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten Campus 440 BA in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Norwegian, Finnish as an attachment in your email.

The manual is 2,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

WOLF-Garten Campus 440 BA Manual

Product: