Manual WOLF-Garten AMBITION 42 E (page 12 of 126) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

457582

Zoom out

Zoom in

1/126

Set cut height

1 Attention! Rotary cutter blade

Undertake work/adjustments on the equipment only after

the motor is switched off and the cutting tool has come to a

standstill.

1. Pull the lever out (1).

2. Set the desired cutting height (2).

3. Press the lever back in (3).

3 Selection of Cutting height

If possible, mow when grass is dry in order to protect turf.

Do not se cutting position too low when mowing very hight

or wet grass.

Connecting to the mains (230 Volts, A.C., 50 Hz)

z The mower operates from any normal household mains sup-

ply, provided with a 16 Amps. fuse.

3 Note: Residual current protection device

These protection devices safeguard while touching

damaged wires, from insulation flaws and in certain cases,

also while damaging live wires.

z We recommend that the equipment only be plugged into

a power socket, which is protected by a residual current

protection device (RCD) with a residual current of not

more than 30 mA.

z Retrofit kits are available for old installations. Consult an

electrician.

Starting and Stoping

z Switch on motor with mowerplaced on level and firm ground.

z not in high grass - alternatively tilt slightly .

Switch-on motor

1. Depress button and hold (1).

2. Lift up bar (2).

3. Release bar (1).

Switch-off motor

z Release bar (2).

Emptying of Grassbox

When the collection bag is full, the flap lowers by itself .

1 Attention! Rotary cutter blade

Undertake adjustments on the equipment only after the

motor is switched off and the cutting tool has come to a

standstill.

z Empty collection bag.

z Remove potential blockages in the cutting space before

starting.

3 Instructions for level indicator:

For an efficient functioning of the level indicator, regularly

clean the holes under the level indicator in the collection

bag with a hand brush.

Tips for mowing

z To prevent strips of grass from being left unmowed, the cutting

paths must always overlap a few centimeters .

z Always let cable trail on the cut side of the lawn.

Maintenance

General

1 Attention! Rotary cutter blade

Before all maintenance and cleaning work:

z pull out the power plug.

z Do not touch running blades.

Cleaning

z Clean mower thoroughly after each mowing with cloth or

brush.

z Do not spray with water.

Winter Storage

z Clean mower thoroughly before storing away.

z Have your mower thoroughly checked once a year by an ap-

proved Service Centre.

z Do not store it in a wet or humid place.

Changing blades

z For all works on blades, coupling and cutter bars, first of all,

pull out the power plug and wear protective gloves.

1 Attention!

An unbalance can develop after regrinding of the blade.

z Always regrind the blades in a specialist workshop,

because an unbalance check should be undertaken

according to the safety regulations.

z Always change blades in a specialist workshop. A torque

spanner of 10 mm is mandatorily required.

Fastening torque of the screws: 8 N-m.

Spare parts

Item number Order description Product information

WG742-04356 Vi 34 C Replacement blade 34 cm

WG742-04357 Vi 38 C Replacement blade 38 cm

WG742-04358 Vi 42 C Replacement blade 42 cm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten AMBITION 42 E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

WOLF-Garten AMBITION 42 E Manual

Product: