638535

WOLF-Garten 46 BAM Manual

14
Zoom out
Zoom in
Previous page
1/38
Next page
14
G
Operation
Operating times
z Please check noise abatement regulations prevailing in your
country.
Starter cord assembly
46 BAM
1. Press locking forward (2).
2. Lift and hold operator presence bail arm (3).
3. Pull the starter rope slowly to the holding bracket.
4.
Twist the cord through the holder.
51 BA
1. Lift and hold operator presence bail arm (1).
2. Pull the starter rope slowly to the holding bracket.
3.
Twist the cord through the holder.
3 Always remove the starter cord from the holder before
folding the mower handles.
Oil Fill
1 Check oil level with mower standing on level ground.
Fill crankcase with quality oil SAE 30 up to the mark „Full“
on dipstick. (Do not overfill.) Capacity approx. 0,6 litre.
Screw in dipstick.
Filling with fuel
1 Caution! Rotating blades
Settings only to be carried out on the machine with the mo-
tor switched off and with the working tools at a standstill.
z Use only normal lead-free petrol.
z Avoid spilling petrol.
z Do not inhale the vapour.
Hang up collection bag
1 Attention! Rotary cutter blade
Undertake adjustments on the equipment only after the
motor is switched off and the cutting tool has come to a
standstill.
z See illustrations .
Set cut height
1 Attention! Rotary cutter blade
Undertake work/adjustments on the equipment only after
the motor is switched off and the cutting tool has come to a
standstill.
1. Pull the lever out.
2. Set the desired cutting height.
3. Press the lever back in.
Selection of Cutting height
z If possible, mow when grass is dry in order to protect turf. Do
not set cutting position too low when mowing very hight or wet
grass.
z We recommend an average cutting height of 40-50 mm.
Mowing (46 BAM)
z On firm ground, preferably not in the high grass.
Engine start / stop
1. Open petrol tap .
2. Set throttle lever on „MAXI“
(1).
3. Pull starter grip rapidly and return slowlyn.
Start / stop of blades
1. Press locking forward (2).
2. Pull and hold safety bar
(3).
z Stop blade: Release safety bar.
Start / stop of wheel drive
z Start wheel drive: lift drive bar (4).
z Stop wheel drive: release drive bar
(4).
3 When you release the safety bar the bla-
de will stop. So the wheel drive can be used for dri-
ving the mower outside of lawn.
1 For mowing first clutch in the blade be-
fore using drive bar.
Stop engine
z Set throttle lever on „STOP“.
Mowing (51 BA)
z On a flat surface, if possible not in high grass.
Motor starten
1. Open gas cock .
2. Raise and hold the safety bracket (1).
3. Pull starter grip and return it slowly by hand.
Wheel drive starten/stoppen
1. Wheel drive on: Raise drive bracket (2).
2. Wheel drive off: Relapse drive bracket (2).
Stop Motor
z Release safety bracket.
H
H
J
D
E
F
H
G
H
H
H
H
F
J
G
J
J
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WOLF-Garten 46 BAM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten 46 BAM in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info