78193
11
Zoom out
Zoom in
Previous page
1/90
Next page
11
G
z Fit the connection cable to the mains lead cleat. Do not allow
to rub against edges or against sharp or pointed objects. Do
not squeeze cables through tight door or window openings.
Switch devices must not be removed or circumvented (e.g.
connecting the switch lever to the handle bars)
Starting up
z Only switch on motor when your feet are at a safe distance
from the cutting tools.
z Do not tilt the lawnmower when switching on the motor, unless
the lawnmower has to be tilted when starting. If that is the
case, do not tip the lawnmower more than absolutely neces-
sary, and only lift the part furthest removed from the user. Al-
ways ensure that both hands are in the operating position
before replacing the lawnmower on the ground.
During aeriation
z Warning, Danger! Cutting tool is lagging!
z Adhere to the safety distance given by the guidance spars.
z Never put your hands or feet near the rotating parts.
z Always keep away from the ejection opening.
z Only switch on motor when your feet are at a safe distance
from the cutting tools.
z If possible, avoid the use of the unit when the grass is wet
otherwise exercise extreme caution to avoid slipping.
z Always make sure that you have a safe footing, especially on
slopes. Never run, always walk slowly.
z Do not use the aeriator on steep slopes.
z Always move aeriator horizontally to the slope, never up and
down.
z Take particular care when changing direction on inclined
ground.
z Take particular care when turning the machine or when pulling
it towards you.
z Stop the working tools if:
the machine needs to be tilted for transport.
if areas other than grass are to be crossed
when transporting the machine.
z Never use the aeriator when protective devices or housing
parts are damaged or missing.
z Before lifting or removing the aeriator switch off motor an wait
until the operating tools have come to a complete standstill.
z Before removing the grassbox or adjusting of the operating
height switch off motor and wait for the complete standstill of
the operating tools.
z Replace worn or damaged blades as a complete set. Observe
installation instructions. For safety reasons always use origi-
nal spare parts.
z Maintenance and cleaning procedures on the aeriator as well
as removing the protective devices may only be carried out
when the engine is switched off.
z Never store the aeriator in damp surroundings or near open fl
ame.
z Should have run over an object with the aeriator it should be
examined by a specialist (see list of repair shops) for safety re-
asons.
z If the connection cable is damaged during use it must be dis-
connected immediately. Do not touch the cable until it is dis-
connected.
z Switch off the lawnmower, pull the mains plug and wait for the
lawnmower to stop running if, for example:
leaving the lawnmower
unblocking a blade
intending to check, clean or work on the lawnmower
you have encountered a foreign object, in which case you
should check the lawnmower for damage and carry out any
necessary repairs.
the lawnmower is vibrating heavily (switch off immediately
and ascertain the cause).
you wish to change the settings or carry out cleaning work.
you wish to check whether the connection cables have be-
come tangled or damaged.
If the connection cable is damaged during use, it must be
immediately disconnected from the mains power supply.
Do not touch the cable before it has been disconnected
from the mains power supply.
Maintenance
1 Attention! Rotary cutter blade
Before all maintenance and cleaning work:
z Pull out the power plug.
z Do not touch running blades.
Disposal
Assembly
Fixing the grab handle
1 Caution!
When collapsing and unfolding the grab handle, the cable
could be damaged.
z Take care that you do not kink the electrical cable and
the Bowden cable.
z See illustrations for assembly.
Do not dispose of electrical equipment in domestic
waste. Recycle equipment, accessories and pa-
ckaging in an environment-friendly manner.
A
B
C
D
E
F
G
H
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WOLF-Garten 34 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten 34 E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info