638169
11
Zoom out
Zoom in
Previous page
1/31
Next page
12
G
Safety instructions
Meaning of the symbols
General information
z This lawnmower is designed for domestic grass and lawn sur-
faces. Because of the physical risk to the user or to others, the
lawnmower must not be used for other purposes.
z Never mow the lawn if others – in particular children and ani-
mals – are in the vicinity.
z Only mow the lawn during daylight or with the aid of appropri-
ate artificial light.
Before mowing
z Always wear sturdy shoes and long trousers when mowing.
Never mow while barefoot or wearing flimsy sandals.
z Check the site on which the machine is to be used, and remo-
ve all items which could be caught and ejected
z Check the line and connection cable fitted to the outside of the
lawnmower for damage and ageing (brittleness). Only use if in
perfect condition.
z Only have the cable repaired by a qualified person.
z Check the grass catchment device regularly for wear-and-tear
and deformation.
z Check the protective flap frequently for brittleness and to en-
sure that it is attached firmly.
z Before use, carry out a visual inspection to check whether the
cutting gear and its mounts are blunt or damaged. In order to
avoid generating an imbalance, replace blunt or damaged cut-
ting gear as an entire set.
Cables
1 Attention! Electric shock through cable damage
When the cable is cut through or damaged, the safety fuse
doesn’t always trip.
z Do not touch cable, before pulling out the power plug
from the socket.
z Damaged cable has to be completely replaced. Patching
the cable with insulating tape is forbidden.
z Please use safety cables. Cables used as connecting lines
must not be lighter than HO7 RN-F rubber-sheathed cables
with a minimum cross-section of 3 x 1.5 mm
2
. Do not exceed
a maximum length of 25 m.
z Plugs and couplings must be protected from splashes.
z Use a residual current protection device (RCD) with a residual
current not exceeding 30 mA.
z Fit the connection cable to the mains lead cleat. Do not allow
to rub against edges or against sharp or pointed objects. Do
not squeeze cables through tight door or window openings.
Switch devices must not be removed or circumvented (e.g.
connecting the switch lever to the handle bars)
When mowing
z Do not tilt the lawnmower when switching on the motor, unless
the lawnmower has to be tilted when starting. If that is the ca-
se, do not tip the lawnmower more than absolutely necessary,
and only lift the part furthest removed from the user. Always
ensure that both hands are in the operating position before re-
placing the lawnmower on the ground.
z Caution, danger! Cutting gear will continue running!
z Maintain the safety distance prescribed by the handle bars.
z Only switch on the motor if your feet are at a safe distance
from the cutting gear.
z Take care to ensure a safe and stable position, especially on
slopes. Never run; always walk calmly forward.
z Always mow slopes at right angles to the incline; never mow
up and down.
z When mowing slopes, be especially careful when changing di-
rection.
z Never mow steep slopes.
z Be especially careful when mowing backwards and pulling the
lawnmower towards you.
z Switch the mower off when tilting it, running on empty or trans-
porting the lawnmower, e.g. to/from a lawn or along paths.
z Never use the lawnmower if safety devices are faulty or mis-
sing, such as deflector and/or grass catchment devices.
z Caution: do not touch running cutters.
z Always keep hands and feet away from rotating parts. Do not
stand in front of the grass ejector opening.
z Never lift or carry a lawnmower while the motor is running.
z Never open the guard flap while the motor is still running.
z Before removing the grass catchment device, turn off the mo-
tor and wait until the cutting gear has stopped running. After
emptying the grass catchment device, reattach carefully.
z Never drive across gravel while the motor is running – impac-
ting stones!
z Avoid mowing wet grass where possible.
z Switch off the lawnmower, pull the mains plug and wait for the
lawnmower to stop running if, for example:
leaving the lawnmower
Attention!
Read instruction
manual before
use!
Keep bystan-
ders away!
Attention!
- Sharp knives -
before perfor-
ming a mainte-
nance work or if
the cable is da-
maged pull out
the plug!
Keep the supp-
ly flexible cord
away from the
cutting blade!
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WOLF-Garten 2.40 E-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten 2.40 E-1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Norwegian, Finnish as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info