Manual WOLF-Garten 2.32 E-1 (page 13 of 33) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Norwegian, Finnish)

638521

Zoom out

Zoom in

1/33

Maintenance

1 Caution! Rotating cutters

Before all maintenance and cleaning tasks:

z Pull the mains plug out.

z Take care not to grab running cutters.

z Check all the visible fixing bolts and nuts regularly for tight-

ness and retighten, particularly those of the cutter beam.

z Do not store the mower in damp rooms.

z For safety reasons, replace worn or damaged parts.

z Use only original WOLF spare parts, otherwise there is no gua-

rantee that your mower complies with the safety regulations.

Disposal

Assembly

Fixing the grab handle

1 Caution!

When collapsing and unfolding the grab handle, the cable

could be damaged.

z Take care that you do not kink the cable.

z See illustrations for assembly.

Fitting the collecting basket

1. Insert the projections of the collecting basket upper section

into the openings in the collecting basket lower section.

2. Push the collecting basket upper section evenly onto the coll-

ecting basket lower section.The collecting basket is securely

located as soon as it clicks in position.

Operation

Operating times

z Please observe the regional regulations.

z Request the operating times from your local authorities.

Insert the cable into the tension relief unit

z Please insert the cable into the tension relief unit in accor-

dance with the illustrations

Fit the collecting basket

1 Caution! Rotating cutters

Settings only to be carried out on the mower with the motor

switched off and with the cutting tools at a standstill.

z Only insert the collection basket when your feet are at a

safe distance from the cutting tools.

1. Lift the protection cover.

2. Hang the collection basket in the notches in the chassis (see

arrow) using the hooks.

3. Apply the protection cover.

Setting the cutting height

1 Caution! Rotating cutters

Settings only to be carried out on the mower with the motor

switched off and with the cutting tools at a standstill.

z switch the motor off and pull the plug out from the mains.

1. Pull the lever outwards .

2. Adjust to the required cutting height .

3. Push the lever back inwards .

Cutting height– Grass condition

z Mow when the lawn is dry if possible, to protect the turf. If the

lawn is wet and the grass is long, it may be better to mow with

a higher cutting height.

z Generally, you should set a cutting height of 40 mm.

Connection to the plug socket (230 Volt, 50 Hz)

z Only connect the mower to plug sockets having a 16 Amp.

fuse (slow acting) (or LS Switch Type B).

3 Note: Residual current protection device

These protection devices protect against serious injury

when touching damaged wires, insulation faults and in cer-

tain cases also when damaging wires under potential.

z We recommend that the mower only be connected to

plug sockets which are protected by a residual current

protection device (RCD) having a residual current of no

more than 30 mA.

z There are retro-fitting sets for older installations. Consult

your specialist electrician.

Switching the mower on/off

z Switch the mower on when standing on level ground.

z Not in long grass– or tilt if necessary .

Motor on

1. Push button (1) and hold it down.

2. Pull the bracket (2).

3. Release the button (1).

Motor off

z Release the bracket (2).

Tips for mowing

z In order to prevent stripes on the lawn, always overlap the

tracks of the cut by a few centimetres .

z Always lay the cable securely on the terrace, paths or grass

which has already been cut.

Electrical equipment must not be placed in the hou-

sehold waste.The unit, accessories and packing

material should be taken to an environment-friend-

ly recycling unit.

A B C D E

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten 2.32 E-1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Norwegian, Finnish as an attachment in your email.

The manual is 1,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

WOLF-Garten 2.32 E-1 Manual

Product: