651836
16
Zoom out
Zoom in
Previous page
1/56
Next page
16
|
Wolf Customer Care 800.222.7820
CARE RECOMMENDATIONS
Care Recommendations
CLEANING
Coffee system Before cleaning, turn unit off at main switch and disconnect from electrical supply. Never submerge unit
in water. Do not wash any components in the dishwasher.
Stainless steel Use a nonabrasive stainless steel cleaner and apply with a soft lint-free cloth. To bring out the natural
luster, lightly wipe surface with a water-dampened microber cloth followed by a dry polishing chamois.
Always follow the grain of stainless steel.
Black glass Spray glass cleaner on a cloth to clean.
Control panel Use spray degreaser to remove ngerprints and food soil. Spray on a cloth before wiping panel.
IMPORTANT NOTE: Do not spray cleaners directly on the control panel.
Coffee spout Clean periodically using a sponge. Remove any coffee deposits in holes with a toothpick.
Water tank Clean periodically (about once a month) with a damp cloth and mild dish soap. Rinse and towel dry.
Drip tray
Grounds container
Empty and clean drip tray before water level indicator protrudes from cup tray. Empty and clean grounds
container when ‘EMPTY GROUNDS CONTAINER’ is displayed. Open service door. Remove and empty
drip tray and grounds container. Wash with warm water and mild dish soap. Rinse and towel dry. Refer to
the illustration below.
Pre-ground compartment Check periodically to verify pre-ground coffee funnel is not blocked.
Interior Access by opening service door. Remove coffee deposits with a sponge and vacuum residue.
Infuser Clean infuser at least once a month. Turn unit off, then open service door and remove drip tray and
grounds container. Press two red buttons inward and remove infuser. Soak in water approximately 5
minutes, then rinse and towel dry. Do not use detergent. Replace by sliding infuser onto internal support
and bottom pin, then press “PUSH” until it clicks into place. Verify red buttons have snapped out.
IMPORTANT NOTE: Do not use detergent to clean infuser. It will remove lubricant on interior parts.
Milk container Unscrew lid, remove milk spout and intake tube. Remove froth regulator by pulling outward. Refer to the
illustration below. Wash all components thoroughly with hot water and mild dish soap. Rinse and dry
before reassembling. Components are dishwasher safe; use top rack of dishwasher.
Milk container lid Clean circuits in lid after making cappuccino. ‘PRESS CLEAN’ ashes on the display. Place a cup
under milk spout. Press and hold ‘CLEAN’ on the lid for 5 seconds to initiate cleaning. ‘CLEANING
UNDERWAY’ appears on the display. Hold ‘CLEAN’ until progress bar is complete. After cleaning,
remove milk container and store in refrigerator.
DRIP TRAY
GROUNDS
CONTAINER
INFUSER
MILK
SPOUT
INTAKE
TUBE
FROTH
REGULATOR
CLEAN
Service door open.
Milk container lid.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wolf EC24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wolf EC24 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info