813079
4
Zoom out
Zoom in
Previous page
1/4
Next page
Page 4 / 4
© Wodtke GmbH Tübingen. All rights reserved. Subject to change without notice. Month of issue 03/2011 Art. No. 950 325
Data Queries
Press “Menu“ key once. Use the “+” and “-“ keys to move through the menu.
Display
message
Menu level
Explanation Remarks
BM
001, 002... Currently installed software version Identifies the basic software installed on the main
circuit board (cf. computer operating system).
Z
ON / OFF Z ON = ignition on
Z OFF = ignition off Shows whether the “Zündung Z“ (ignition) output is live
(ON) or not (OFF).
S
... Feed screw interval in seconds Shows the current working time interval of the feed
screw in seconds; this determines pellet feed rate.
PE CAL Calibration routine for pellet throughput Start routine here. Observe Operating Manual! Permits
adjusting pellet throughput according to pellet type or
batch.
U
... Fan speed in % Shows the current voltage at the “fan” output in terms
of % of nominal voltage.
L
... Air flow rate at the air flow sensor in m3/h Shows the combustion air flow currently measured by
the air flow sensor (LM) in terms of m3/h.
TP
... Temperature at pellet chute in °C Shows the temperature currently measured by the TP
sensor at the pellet chute.
TL
... Temperature at air flow sensor in °C Shows the temperature of the combustion air currently
measured by the LM in the suction pipe.
TR
... Flue gas temperature in °C Shows the combustion temperature currently
measured by the TR sensor in the firebox.
TW
... Temperature at water heat exchanger in
°C Shows the water temperature currently measured by
the internal boiler sensor in the heat exchanger.
P
ON / OFF
Pump relay (make-contact relay)
P ON = pump on = 230 V or mains voltage
P OFF = pump off = 0 V
Shows whether the “Pumpe” (pump) output is live
(ON) or not (OFF).
R1
ON / OFF
Auxiliary relay 1 (make-contact relay)
R1 ON = 230 V or mains voltage
R1 OFF = 0 V
Functional message
ON = stove is running (though error may be present)
OFF = stove not in operation
R2
ON / OFF
Auxiliary relay 2 (make-contact relay)
R2 ON = 230 V or mains voltage
R2 OFF = 0 V
Collective error message
ON = no error
OFF = has produced an error shutdown / has been
switched off manually
R3
ON / OFF
Auxiliary relay 3 (make-contact relay)
R3 ON = 230 V or mains voltage
R3 OFF = 0 V
Error message from temp. sensor at pellet chute (TP)
ON = temperature at pellet chute (TP) too high
OFF = temperature at pellet chute (TP) ok
R4
ON / OFF
Auxiliary relay 4 (break-contact relay,
potential-free, max. load 2 A)
R4 ON = relay open
R4 OFF = relay closed
Functional message (via monitored potential-free
safety relay)
ON = stove is running (though error may be present)
OFF = stove not in operation
BW
... Operating hours since last servicing x 10 Example: BW 56 = 560 hours since last servicing.
BG
... Total operating hours x 100 Example: BG 56 = 5,600 total operating hours. This
counter cannot be reset.
PR
... Remaining pellet consumption (in tons)
until next cleaning is due
Examples: PR -0.9 = another 0.9 t of pellets can be
burnt before the next cleaning becomes due.
PR 0.2 = cleaning overdue since 0.2 t.
PW
Remaining pellet consumption (in tons)
until next servicing is due
Examples: PW -2.9 = another 2.9 t of pellets can be
burnt before the next servicing becomes due.
PW 0.2 = servicing overdue since 0.2 t.
PG
Total pellet consumption in tons Example: PG 66.5 = 66.5 t of pellets have been burnt
in total. Cannot be reset.
wodtke GmbH • Rittweg 55-57 • D-72070 Tübingen-Hirschau
Tel. +49 (0) 70 71 / 70 03 - 0 • Fax +49 (0) 70 71 / 70 03 - 50
info@wodtke.com • www.wodtke.com
Please appreciate that we will not be liable for changes following the printing of this documentation or for printing errors.
Kurzanleitung_S5_Ausgabe_2011_04_07_Englisch
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wodtke Ivo.safe S5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wodtke Ivo.safe S5 in the language / languages: English as an attachment in your email.

The manual is 0.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wodtke Ivo.safe S5

Wodtke Ivo.safe S5 User Manual - German - 80 pages

Wodtke Ivo.safe S5 User Manual - French - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info