813089
67
Zoom out
Zoom in
Previous page
1/83
Next page
Bedienungsanleitung Steuerung S4_2006_09_25-neu.doc Page 67 / 83
© wodtke GmbH Tübingen. All rights reserved. Subject to change without notice. Month of issue xx/2007 Art. No. 950 281
9.10 Cleaning the flue gas fan and flue gas connector (all models)
If the fan wheels or fan housing become
soiled with strongly adhering soot or tar, it
is essential to clean them, since otherwise
the unbalance of rotating mass can
damage the bearings or the fan wheel
might graze the housing or become blocked.
Do the following:
1.
Release the 4 outer screws of the fan
motor. Do not release the inner screws (with
rubber shock pads).
Important notes: If possible only clean
the fan when dismounted in order to
avoid damage.
2. Clean all fan wheels with a cloth or brush.
Caution:
Do not bend the fan wheels.
Danger of rotary imbalance!
3.
Using a cleaning brush clean the sleeve of
the flue gas sensor inside the flue gas fan
(see picture), removing any soot that may be
clinging to it (which would have an
undesirable insulating effect).
Alternatively you can also dismount the
whole sleeve from the flue gas fan and then
clean it (it is not necessary to dismount the
flue gas sensor TR from the sleeve for this
purpose). Another alternative is to remove
the flue gas connector and then clean the
sleeve by reaching in from the outlet side of
the flue gas fan. Brush carefully in order not
to damage the sensor sleeve or the fan.
The following picture shows the position of
the sleeve of the flue gas sensor TR and
how to clean it.
After completing all cleaning routines
reassemble components in the reverse order
of disassembly.
Caution / Important note:
Be sure also to remove the flue gas
connector and clean it with the cleaning
brush. All servicing is pointless if the flue
connector is clogged with ash or soot, since
then the flue gas will not be drawn off
however clean the stove itself is.
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wodtke Frank SX waterplus S4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wodtke Frank SX waterplus S4 in the language / languages: German as an attachment in your email.

The manual is 3.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wodtke Frank SX waterplus S4

Wodtke Frank SX waterplus S4 User Manual - German - 76 pages

Wodtke Frank SX waterplus S4 User Manual - French - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info