813148
9
Zoom out
Zoom in
Previous page
1/68
Next page
Manual_S5_Airplus_2015_04_20 Page 9 / 68
© Wodtke GmbH - Tübingen. All Rights and Changes Reserved.Printed 04/2015 Part No. 950 976
3.9 Pellet Supply /
Pellet Storage
Wood pellets are delivered in an absolutely dry
state. In order to maintain the quality of the pellets,
the pellets must be stored dry and free of contam-
inants. Our units are normally (more than 90%)
loaded conveniently by hand using bagged goods
(15 kg bag). In the case of 3 t of pellet consump-
tion per year, this makes 200 bags over the course
of a year; that is, only 1/2 bag per day on average.
Pellets can also be delivered by tank trucks and
blown into a warehouse / silo in the case of greater
annual consumption. For storage of pellets and
transportation of pellets from the warehouse to the
furnace, wodtke offers corresponding conveyance
technology systems (see wodtke price list).
The wodtke "Vario" pellet gate is available for
connection to an individually constructed, external
pellet storage facility (constructed by the cus-
tomer). We recommend feeding the pellets by
gravity, by positioning the pellet stock above
the furnace. The advantages of this are lower
construction costs and simple, reliable and sturdy
design without additional drive units and motors.
With the "Vario," the pellet connection can also be
closed and the furnace can be separated from the
storage facility for maintenance purposes.
If pellet conveyance technology is connected to
the wodtke Pellet-Primärofens of the PO 03 se-
ries, room air independent operation is no longer
possible, since by design, fabric silos and convey-
ance systems cannot be sealed. In that case, a
wodtke DS01 differential pressure controller must
be installed for monitoring.
3.10 Voltage Supply
Required voltage supply: 230 VAC / 50 or 60 Hz.
Voltage ranges from 195 V to 255 V are permitted.
All furnaces have automatic frequency recognition
and change-over from 50 Hz to
60 Hz networks (e.g. Japan).
4 ID Plate and Serial Number
The ID plate and the serial number of the furnace
are located in the pellet drawer (inside; open pellet
drawer with turning handle on the rear side of the
furnace and swing open the pellet drawer). Please
record the serial number of your furnace here and
be sure to keep this document. If you should re-
quire spare parts, you must always specify the se-
rial number of your furnace so that we can supply
you with the correct parts.
Please enter the serial number from the pellet
drawer (inside) here and keep this document:
Ser. No.:________________
Fig. 1: ID Plate
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wodtke Easy.nrg S5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wodtke Easy.nrg S5 in the language / languages: English as an attachment in your email.

The manual is 6.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wodtke Easy.nrg S5

Wodtke Easy.nrg S5 User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info