521640
5
Zoom out
Zoom in
Previous page
1/33
Next page
8 9
DEGBFRITESNLDASVFINO
Prior to use
We would like to congratulate you on purchasing the automatic coffee
maker.
The automatic coffee maker may only be used for its intended purpose
in compliance with this operating manual. Please read the operating
manual carefully prior to first use. It provides instructions for the use,
cleaning and care of the appliance. We will not accept any liability
for damages resulting from non-compliance. Keep the manual in a
safe place and pass it on to any future user. Please also observe the
warranty information at the end of the operating manual.
This appliance is intended for domestic use and similar applications,
such as:
in staff kitchens in shops, offices and other commercial
establishments;
in agricultural establishments;
by guests in hotels, motels and other accommodation
facilities;
in bed-and-breakfast facilities.
The appliance is not intended for purely commercial use.
Be sure to follow the safety information when using the appliance.
Glass breakage is excluded from the warranty.
Technical data
Rated voltage: 230 V~ 50 Hz
Power consumption: 900 W
Protection class: I
Safety information
Connect the appliance only to a shockproof socket that has been
installed according to regulations. The power cable and power plug
must be dry.
D o not pull the power cable over sharp edges or jam, do not let it
hang down and protect from heat and oil.
Use an extension cable only if it is in good condition.
D o not pull out the plug by the cable or touch it with wet hands.
D o not carry the appliance by the power cable.
D o not place the automatic coffee maker on hot surfaces such
as stove tops or near an open gas flame, as this may cause the
housing to melt.
D o not place the appliance on water-sensitive surfaces. Water spray
may damage the appliance.
D o not switch on the appliance without water. Do not fill the
fresh water reservoir with more cold water than for the maximum
number of cups.
D o not fill water into the automatic coffee maker while the appli-
ance is switched on or still hot. Switch off the automatic coffee
maker first and let it cool down for five minutes.
Caution. The appliance becomes very hot. Risk of scalding due to
emerging steam. Never swing out the filter or open the cover while
brewing is in progress.
This appliance is not intended to be used by persons (including
children) with limited physical, sensory or intellectual faculties or
who lack experience and/or knowledge, unless they are supervised
by a person responsible for their safety or have received instruc-
tions on how to use the appliance.
Please make sure that children do not have an opportunity to play
with the appliance.
I f you do not intend using the appliance for an extended period,
pull the power plug.
I f the following happens, do not use the appliance and unplug it
immediately:
the appliance or power cable are damaged
a defect is suspected after a fall or similar occurrence
In these cases, have the appliance repaired.
The appliance must be decalcified regularly.
The glass pot is not suitable for use in microwave ovens.
Never immerse the appliance in water.
W e will not accept any liability for damages resulting from misuse,
non-compliance with the decalcification instructions, or unquali-
fied repairs. Also, guarantee services are excluded in such cases.
I f the power cable of the appliance is damaged, it must be replaced
by the manufacturer’s authorised service agent or a qualified
technician. Incorrect repairs may result in considerable hazards for
the user.
Start-up
Prior to initial use or when the automatic coffee maker has not been
operated over a long period, fill the appliance with the maximum
amount of water but without coffee powder, let the water boil and
finally rinse the filter and pot with hot water.
Setting the current time
After connecting the power plug to a socket the display will
flash 12 00. Set the current time by pressing the buttons h and min.
As soon as the colon starts flashing, the clock is set and running, a
further confirmation is not required. You can change the current time
at any time by pressing the h and min buttons.
Note: After a power failure or after the power plug has been discon-
nected, the time must be reset.
Programming the Auto-On time
The Auto-On system of the appliance automatically starts the brewing
process at the set time. The Auto-On time can be programmed up to
24 hours in advance. It is displayed when you press the set button and
BREW appears in the display. Keep the set button pressed and set the
required Auto-On time by pressing the buttons h and min.
Note: After a power failure or after the power plug has been discon-
nected, the Auto-On time must be reset.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wmf Only You koffiezetter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wmf Only You koffiezetter in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info