551540

Wmf LONO - 0411010041 Manual

27
Zoom out
Zoom in
Previous page
1/132
Next page
27
en
WMF Pre-Brewing System
The pump first only conveys a small amount. The brewing process first continues
only after a brief pause, during which the coffee powder can swell. A particularly
intensive flavour is achieved in this way.
4. If you would like to cancel the process early, press the start button again.
5. Turn the adjusting knob (10) back to the home position
(C) as soon as no
more liquid is being dispensed.
Tip
▪ Stir the coffee before drinking it so as to achieve a uniform coffee strength in
the cup.
▪ For hygienic reasons, remove the used coffee pads from the pad cartridge (9)
as soon as possible.
▪ Seal the packaging used to store the pads to prevent the loss of aroma.
▪ Fill with fresh tap water every day. Rinse the water tank (11) with tap water
just before use. Then carry out a rinse procedure.
Change the coffee quantity (Teach-In function)
The coffee pad machine offers the convenient option of programming the desired
coffee quantity individually for each start button
(3) or (5) indepen-
dently of each other. You can therefore change the strength of the coffee accord-
ing to your personal needs:
1. Insert the pad as described above, turn the adjusting knob (10) in the range
(A) as far to the right as possible and wait until the On / Off button (4)
illuminates white.
2. Hold down the start button
(3) or (5) that is to be programmed until
the On / Off button (4) flashes white (approximately 4 seconds). The program-
ming mode is now active during brewing. Watch as the cup is filled. Once the
desired quantity is reached, press the same start button again. The brewing
is stopped and the brew time (on-time of the pump) is programmed. Every
brewing with this start button now always takes place with the same brew
time. The prepared coffee quantity will only differ slightly depending on the
quality of the coffee.
Information about the programming mode
The programming mode is active during brewing for approximately 30 seconds
or approximately 60 seconds . If you do not push the start button before
the brewing stops automatically, then the maximum possible fill amount is
programmed.
Resetting to delivery condition
Proceed as follows to reset the fill amount back to the delivery condition:
1. Switch off the appliance.
2. Hold down both start buttons
(3) and (5) (3 to 4 seconds) until the
On / Off button (4) flashes briefly.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wmf LONO - 0411010041 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wmf LONO - 0411010041 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info