521660
11
Zoom out
Zoom in
Previous page
1/64
Next page
11
DEGBFRITESNLDASVFINO
Only operate the toaster in the upright position away from other
objects.
Do not cover the bread slots during toasting. Do not lay any bread
slices or rolls on the casing, as this causes the device to overheat.
No liability is assumed for any damages in cases of misuse,
improper operation or unprofessional repairs. Claims under
warranty are likewise excluded in such cases.
The appliance is not designed for commercial use.
Start-up
The unnecessary length of the connecting cable can be wound at the
base of the device. Connect the mains plug to an earthed socket.
Prior to the first use, run the toaster through at least three
toasting cycles without bread at the medium setting in order
to remove the surface protection from the heating elements.
The resulting odour is harmless, but this should nevertheless be
performed in a well-ventilated area. Allow the device to cool off
somewhat before switching it on every time.
Insert the bread slices into the bread slot. They should not be thicker
than 30 mm so that they do not jam. Place small slices upright in the
bread slot so that it is easier to take them out after toasting.
Press the lift button down and immediately afterwards set the control
knob for the degree of browning to the middle level, so that five of
the ten scale segments light up. After the toasting time required for
the selected setting expires, the device switches off automatically and
the finished toast is raised from the bread slot for removal.
Note: Once the lift button has been pressed down, firstly a varying
number of light segments illuminate, depending on the selected
degree of browning, from 1 – very light to 10 – very dark. The
segments go out one by one in clockwise order so that browning
progress can be seen. As soon as all segments have gone out, your
toast is ready and is raised from the bread slot.
Automatic cut-out switch
To prevent damage, the temperature of the device is checked each
time after switch-on. If the toaster is too hot, all light segments flash
rapidly three times and the process is stopped. In this case, wait a few
minutes to give the device time to cool off.
Removing the toast
The bread lift can be raised in order to better grab the slices when
removing. To do this, raise the lift button upward.
Information about the degree of browning
If the toast is too light, select a higher control setting. If the toast is
too dark, place the control on a lower setting. The higher the setting,
the darker the browning is. With the control, you can brown toast
entirely to your taste from just slightly (min
setting) to strong, dark
brown (max
setting).
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wmf Lineo toaster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wmf Lineo toaster in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info