521661
14
Zoom out
Zoom in
Previous page
1/84
Next page
14
Keep-warm function
(version with glass pot only)
Your device is equipped with a keep-warm function to keep the finish brewed coffee
at serving temperature. The keep-warm time is set to 20 minutes by default.
appears in the display during the brewing process.
Before the brewing process starts, you can increase the keep-warm time to 40 min-
utes by repeatedly pressing the
button or can deactivate the function by setting
it to 0 minutes.
The selected keep-warm time is confirmed by pressing the
button or the start /
stop button.
Note: If you wait longer than approximately 5 seconds to confirm, it will return to
the 20 minute default.
Note: The changed keep-warm time only applies for that brewing process.
Allow the device to cool for 5 minutes before preparing more coffee.
Scaling indicator
The automatic scaling indicator determines the time for the due descaling. Depend-
ing on the coffee consumption and the set water hardness, you will be prompted to
descale after 4 to 6 weeks by the flashing CALC display during brewing.
After another approximately 50 cups of coffee, CALC appears permanently in the
display and no more coffee can be brewed. A descaling must now take place.
Setting the water hardness
Your appliance has an automatic scaling display. To protect against too much lime
scale, the appliance is pre-configured
for very hard water. Ask your local waterworks or local authorities about the water
hardness of your tap water. Change the setting when the water hardness is less than
21°dH. You will not be asked to descale as often as before.
To do so, hold the Set button approximately 7 seconds until Set CALC appears in the
display. The CALC display and the current set degree of hardness, e.g. H4, now flash
alternately. As long as the water hardness is flashing in the display, it can be changed
to water hardness 1, 2, 3 or 4 by pressing the
button.
Confirm the setting by pressing the Set button.
Hardness range Hardness
1 soft 0 - 7° dH
2 medium >7- 14° dH
3 hard >14 - 21° dH
4 very hard >21° dH
1° dH corresponds to approximately 0.18 mmol/l Ca and Mg ions
Descaling
Limescale deposits lead to losses of energy and impair the service life of the device.
We recommend using durgol® universal. It is highly effective and non-abrasive
without additional reaction time.
You can find this where the device was purchased, in select speciality stores or you
can order it directly from wmf consumer electric.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wmf LINEO shine koffiezetter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wmf LINEO shine koffiezetter in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info