690798
18
Zoom out
Zoom in
Previous page
1/124
Next page
18
Purpose
The appliance includes accessories (flat beater, dough hook and whisk) that may
be used only for whisking, mixing, kneading and beating food.
The appliance is equipped with a mixer attachment that is suitable for preparing
smoothies and shakes.
Optional accessories enable the appliance to be used for a variety of different
applications: cutting and grating, meat mincing, rolling out home-made dough or
cutting spaghetti and tagliatelle.
Getting started
Remove all packaging from the appliance.
Clean the device before use as described in the chapter on “Cleaning and
care.”
Press the release button (7) to tilt the mixer arm upwards (Fig. A).
Push the required mixer accessory (flat beater, kneading hook or whisk) into
the attachment as far as it will go and rotate it anticlockwise until it locks
into place (Fig. B).
Place the mixing bowl (8) on the base. Ensure that the handle is on the side of
the appliance. Turn the mixing bowl (8) in a clockwise direction (Fig. C).
Note: Do not use force when turning the mixing bowl (8).
Press the mixer arm downwards until you hear it lock into place.
Set the speed controller (10) to the Off position (0).
Now insert the mains plug into the socket.
Note: The appliance has a built-in automatic cable winder (15). Any
unrequired length of cable can be stowed away in the appliance. Pulling on
the power cable automatically causes it to wind back into the appliance (Fig.
D).
The LCD (3) lights up white and shows the preset time “00”. The appliance can
be used with or without the timer function. Follow the steps in the “Timer
function” section to change the preset time.
Note: If the time-setting button is not pressed within one minute, the LCD (3)
automatically switches itself off.
Select the desired speed. The appliance starts.
The LED ring on the speed controller (10) lights up white.
Note: The appliance is equipped with a safety function. It will start only if the
mixer arm is lowered into position correctly and the covers for accessories (4)
and the mixer attachment (1) are in place.
Note: The food processor requires a start-up phase during which all of the
mechanical components are synchronised. Short, loud operating noises may be
produced, particularly when preparing heavy dough.
When the mix function has finished, set the speed controller (10) to the Off
position (0).
Pull the mains plug out of the socket before emptying the mixing bowl (8).
A
1
2
B
C
D
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wmf KUCHENminis One for All - 1644 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wmf KUCHENminis One for All - 1644 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info