653464
10
Zoom out
Zoom in
Previous page
1/48
Next page
10
Initial operation
Clean the inside of the kettle thoroughly before using it for the first time. To do
this, open the lid as shown in the picture.
A strainer in the pouring spout ensures that large pieces of limescale are filtered
out when pouring.
The part of the connection cable which is not required can be wound up in the
base unit.
Connect the mains plug to an earthed socket.
Fill with as much water as needed to be able to see the level on the water level
indicator, although do not go above the Max mark. Close the lid. Only in this way
will the automatic boil-stop function work reliably.
Place the kettle in any position on the base unit. Only after this has been done
can you press downwards on the on/off switch under the handle.
The on/off switch only functions when the kettle is standing on the base unit.
Do not use the first quantity of boiled water for food preparation.
Automatic switch-off
Shortly after the water has started to boil, the automatic switch-off function
will shut down the kettle automatically. If the kettle is filled with only a small
quantity of water, the switch-off period will be increased.
If you require warm but not boiling water, the heating process can be interrup-
ted at any time by pressing the ON switch. The appliance will then shut down
automatically as soon as the kettle is removed from the base.
For functional reasons, a small amount of condensed water may run out through
the openings at the bottom of the handle and onto the rim of the base. This is
due to technical reasons and does not impair the safety of the appliance.
Safety system
If the kettle is accidentally operated without water, a thermostat protects the
kettle from overheating by switching off the appliance.
Make sure to allow the kettle to cool down before filling with water.
If the first thermostat should fail due to misuse, an additional temperature limiter
offers reliable protection.
Cleaning and maintenance
Disconnect the appliance from the mains and allow it to cool down. Never
immerse the appliance in water; simply wipe it over using a damp cloth with a
drop of washing-up liquid and then rub dry.
Do not use harsh or abrasive cleaning agents.
The bottom of the kettle is made of stainless steel. If you notice rust stains all the
same, these are only deposits sticking to the surface. Remove these immediately
with a cleaning agent for stainless steel.
The mesh filter in the spout can be pulled off to clean when the lid is open. To re-
move, press up the top lug. When inserting, place the mesh filter centrally against
the bar and then latch home to the front.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wmf BUENO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wmf BUENO in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info