690844
10
Zoom out
Zoom in
Previous page
1/44
Next page
10
Please note: Not every kind of food can be filled until the max-marking. The maximum filling weight
for each kind of food may not be exceeded.
Recipe
Meat Max 70 g
Nuts Max 100 g
Cheese Max 60 g
Getting started
Clean all parts as described in the "Cleaning and care" section before allowing them to come into
contact with food.
Stand the container (2) on the drive unit (4) and lock it in place by turning it clockwise. Make sure
that the container (2) is positioned correctly, see the markings on the drive unit (4) as well as on
the container (2).
Place the stainless steel blade (3) into the slot at the bottom of the container (2).
Warning: The blade (3) is sharp. For this reason, always attach the protective cover when the blade
(3) is not in use, and pick up the blade unit (3) by the plastic handle only.
Add coarsely-chopped food to the container (2) to no higher than the MAX mark and lock the lid
(1) in place by turning it in a clockwise direction. Make sure that the lid (1) is positioned correctly.
After connecting the mains plug, press the pulse button on the lid (1) in multiple short bursts until
the desired result has been obtained. Do not press down on the pulse button for more than 30
seconds because the device is only designed to be used for short periods.
Wait until the stainless steel blade (3) has come to a complete standstill before removing the lid (1).
Safety function
The processor's motor will only start if the container (2) and lid (1) are attached correctly. The lid (1)
cannot be removed while the device is in operation.
Overload protection
The appliance is fitted with an overload protector. This prevents the motor being damaged by
overloading. If the appliance switches off during operation, proceed as follows:
Pull out the mains plug and allow the appliance to cool down for approx. 20-30 minutes.
Once the appliance has cooled down, insert the mains plug into the socket again and continue with
processing.
Cleaning and care
Remove the mains plug after use. Never immerse the drive unit (4) in water, simply wipe it externally
with a damp cloth. Never use abrasive cleaning agents. Take care when cleaning that you do not injure
yourself on the sharp blade (3). Food residue may get into the blade slot. Remove this after every use.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wmf 16580011 - KUCHENminis at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wmf 16580011 - KUCHENminis in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info