Manual Wmf 0417020021 Skyline (page 8 of 44) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

653511

Zoom out

Zoom in

1/44

Test out which setting suits your personal preference.

The grinding process begins once the start/stop button has been

pressed (6). The motor only runs if the collection container (7) has

been put in place properly.

Once the required amount of coffee has been ground, the mill shuts

off automatically.

The grinding process can be interrupted at any time by pressing the

start/stop button (6) again.

Wait until the motor has stopped before removing the collection con-

tainer (7). Press down slightly when removing the collection container

(7). The coffee powder can be placed directly in the coffee machine

ﬁlter.

To avoid loss of aroma, coffee should only be milled for immediate use.

Excess coffee grounds can be kept in the collection container (7). Then

close the collection container (7) with the rubber cap (1).

Important information:

If the mill does not run, the motor may be obstructed by a bean. In

this case select a higher degree of ﬁneness. Once the motor is running

the desired degree of ﬁneness can be immediately reselected after

start-up.

If the motor still does not start, or has difﬁculty starting up at the

highest degree of ﬁneness, clean the mill as described under „Cleaning

and Care“.

Cleaning and care

Warning! Remove from the mains before cleaning. Under no circum-

stances submerge the device in water - wipe the outside with a damp

cloth instead.

Do not use scourers.

Remove the collection container (7) and clean with a mild cleaning

product. Dry well before replacing the collection container (7).

Remove the remaining beans before removing the bean hopper (3).

Clean the bean hopper (3) and bean hopper cap (2) in dish water and

dry well. The mill can be opened when malfunctions occur or for clea-

ning. Remove the bean hopper (3) and then remove the mill ring (8).

Clean the mill and the mill ring (8) with a small brush or the cleaning

brush included in delivery (9).

Warning: The mill has sharp edges - there is danger of injury.

Replace the mill ring (8) and turn until it clicks into place and only

moves slightly.

Important: The safety ring must be turned in a clockwise direction as

far as it can go (see illustration) before the bean hopper (3) is replaced.

Otherwise the bean hopper (3) cannot be put back in place. Should

the safety ring be incorrectly replaced during cleaning, you can turn it

manually to the left.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wmf 0417020021 Skyline in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wmf 0417020021 Skyline Manual

Product: