653513
10
Zoom out
Zoom in
Previous page
1/48
Next page
10
Start-up
Prior to first use, clean the kettle thoroughly from the inside. To do so, open the
lid by pressing the button on the handle.
A mesh filter is fitted in the spout to hold back large limescale and calcium
deposits when pouring out the water.
The section of the power cable not in use can be wound up and stored on the
underside of the base.
Connect the power plug to a shockproof socket.
Fill in at least so much water that the water level is visible on the water level
indicator, but no higher than the max mark. Close the lid. Only then will the
automatic boiling stop work reliably.
Set the kettle on the base facing in any direction. Only then push the ON switch
under the handle downwards.
When using the kettle for the first time, do not use the boiled water for preparing
food or beverages.
Automatic switch-off
Shortly after the water has started to boil, the automatic switch-off function
will shut down the kettle automatically. If the kettle is filled with only a small
quantity of water, the switch-off period will be increased.
If you require warm but not boiling water, the heating process can be interrupted
at any time by pressing the ON switch.
For functional reasons, a small amount of condensed water may run out through
the openings at the bottom of the handle and onto the rim of the base. This is
due to technical reasons and does not impair the safety of the appliance.
Safety system
If the kettle is accidentally operated without water, a thermostat protects the
kettle from overheating by switching off the appliance.
Make sure to allow the kettle to cool down before filling with water.
If the first thermostat should fail due to misuse, an additional temperature limiter
offers reliable protection.
Cleaning and maintenance
Disconnect the appliance from the mains and allow it to cool down. Never
immerse the appliance in water; simply wipe it over using a damp cloth with a
drop of washing-up liquid and then rub dry.
Do not use harsh or abrasive cleaning agents.
The bottom of the kettle is made of stainless steel. If you notice rust stains all the
same, these are only deposits sticking to the surface. Remove these immediately
with a cleaning agent for stainless steel.
The mesh filter in the spout can be pulled off to clean when the lid is open. To
remove, press up the top lug. When inserting, place the mesh filter centrally
against the bar and then latch home to the front.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wmf 0413050021 Skyline at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wmf 0413050021 Skyline in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info