797574
14
Zoom out
Zoom in
Previous page
1/26
Next page
14
5. PREWASH AND SOAK
This key allows for the selection of prewash
or soak function. Upon each press of the but-
ton the LED indicator changes state There are
three possible combinations which are:
Led steadily on - prewash
Led blinking - soak
Led off - exclusion of both
The prewash function is used to make a low
temperature washing before the main wash cy-
cle to remove stains.
The soak function is used to soak laundry be-
fore main wash cycle.
6. START/PAUSE
The button activates and deactivates the se-
lected washing programme.
7. DELAYED START AND CHILD
SAFETY E3D MODEL ONLY
This button, when selecting a washing pro-
gramme, it allows for the adjustment of the de-
lay start function; while after starting the wash
cycle it allows for the activation of the child
safety locking feature.
To set the delayed start time the button is
pressed repeatedly until the desired value
shown on the digit display. The value can be
chosen between 1 and 24 hours.
Pressing the Start/Pause button the countdown
starts on until the expiration of the time on the
digit display.
To set the child lock, after the starting of the
wash cycle, press and hold the button P7 until
the red LED of the “Door Lock”
To disable this feature, press and hold the but-
Door” lamp becomes stable.
DOOR LOCK LED
This LED, red in colour, indicates the locking of
the door which can be opened only after it turns
itself off.
FIRST USE
Before the regular use it is necessary to
-
dry and setting the temperature to 60°C with
cotton programme.
Now the machine is ready for use, proceed as
follows:
Load the laundry, taking care to select it.
Close the door, taking care not to leave laundry
protruding from the seal, see figure page 11.
1) Selection of wash programme.
Customize the washing programme adjusting
the spin, temperature and choosing any options
for the programme selected.
Press the start button; the program starts when
the LED red coloured is on. Any variations to
be made to temperature, spin and special func-
tions can also be performed during the execu-
tion of the programme, obviously before the
beginning of the heating and spinning phases.
Also after the beginning of the programme the
soak, extra rinse or rinse hold can be enabled.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WLA 3610A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WLA 3610A in the language / languages: English as an attachment in your email.

The manual is 5.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info