807262
4
Zoom out
Zoom in
Previous page
1/8
Next page
page 4page 13
You may want to mount the base unit at this point onto the
towball to aid access and stabilise the assembly.
If so, please follow the mounting instructions on page 12.
3.
Fitting the cycle carrier bars.4.
Check all xtures and bolts!
IMPORTANT: Check light function!
Ensure the strap is
correctly routed
through the cambuckle .
10. Positioning and xing the bikes on the carrier.
P
P
To build arms follow individual instruction sheet supplied with each arm.
Please remember to build the arms onto the cycle support frame.
Cycle 1:
Place the biggest/heaviest bike on the carrier rst, closest to the vehicle.
Position the wheels into the wheel locators and lean the bike against the
cycle support frame.
Secure the bike with the strap to the cycle support frame.
Secure the wheels in the wheel locators using the straps .
Cycle 2:
Fits in the 2nd set of wheel locators with the xing arm attached at one end
to the cycle support frame and to the cycle frame at the other.
Secure the wheels in the wheel locators using the straps .
Cycle 3:
Fits in the 3rd set of wheel locators with the xing arm attached at one end
to the cycle support frame and to the cycle frame at the other.
Secure the wheels in the wheel locators using the straps .
S
P
R
P
G
To aid tment, gently knock the
end plugs into the tube. Use a
soft surface (wood) or use a rubber mallet.
x 4
Attach the plug to the vehicle using the appropriate 7 or 13 pin electrical
connection. Ensure the plug is fully inserted and that the cable cannot touch
the oor. Fit the protective cap to the end not being used.
Please Note: If using the 7 pin connection
the reversing light will not function.
or
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Witter ZX204 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Witter ZX204 in the language / languages: English as an attachment in your email.

The manual is 4.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info