690072
18
Zoom out
Zoom in
Previous page
1/114
Next page
The air quality light is
green, but there is still
dust/odor in the air.
Replace the filters as needed.
The air quality light is
yellow or red, but the
air seems clean.
Clear the sensor with a vacuum cleaner, as it may be blocked or
clogged.
- Sometimes a compressed can of air may unclog the dust in the
sensor.
OCCURRENCE POSSIBLE CAUSE / SOLUTION
Unit makes a ticking
sound.
This is caused by the PlasmaWave™ . technology, it may
come and go depending on the environment, but as long as the
PlasmaWave™ light is on, the function is working.
Unit interferes with radio
or television reception.
The FILTER
REPLACEMENT
indicator remains lit after
replacing the True HEPA
and/or Carbon Filter.
Because this unit radiates radio frequency energy, we suggest
you try one or more of the following:
- For better reception, adjust the television/radio antenna.
- Move the unit away from the affected television/radio.
- Plug the unit power cord into an outlet different from the
television/radio power cord.
Press the reset filter button by gently inserting a paperclip end
into the RESET FILTER opening,. Hold for 3-5 seconds until
you hear a “beep” and light turns off.
The Remote Control
Does Not Work
- Make sure the battery is installed properly.
- Make sure the battery may not need replacing due to being
worn out.
- Make sure the remote has a clear line of sight to the air
cleaner.
There is still some dust
you can see in the air or
on my furniture
- The unit will capture most dust and particles, however with
opening doors, windows, central HVAC etc… there may still
be some level of dust that you can see.
There is nothing holding
the filters in place
- The filters are meant to rest inside the unit. Once the unit
is turned on, the force of air pulled through the machine will
create a tight seal of the filters.
I can hear revving of the
fan motor
- This is normal, especially at night when all environmental
sounds are quiet, you may hear the motor running in
repetition.
16
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Winix P300UK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Winix P300UK in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 26,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info