690080
15
Zoom out
Zoom in
Previous page
1/114
Next page
13
CAUTION: Turn off the air clearner
and unplug the electrical cord before
performing any maintenance.
True HEPA Filter Replacement
1. Turn off the air cleaner and unplug the
electrical cord.
2. Remove the front panel by pulling gently
from the lower portion of the panel. Do
not force, the panel should remove easily.
3. Remove the Carbon Pre-Filter and plastic
frame by gently pulling out from the
bottom and down from the top.
4. Remove the True HEPA Filter and dispose
of it.
5. Remove the plastic wrap from the new
True HEPA Filter and insert it with the
arrow showing “air flow” pointing in
toward the back of the top and bottom
of the True HEPA Filter will point out to
the front of the unit.
6. Reinstall the plastic frame and Carbon
Pre-Filter by inserting tabs up into the
air cleaner and gently pushing in at the
bottom tab until the frame fits into place
snuggly.
7. Replace the front panel by hooking the
panel on the top of the unit. Swing the
panel in by pushing gently on each side
of the unit and then lock it into place.
8. Plug in air cleaner and press POWER
button until short “beep” sounds.
9. Press the RESET FILTER button by
gently inserting a paperclip into the
RESET FILTER hole on the control panel.
The light will flash 5 times before a “beep”
sounds to indicate the filter has been
reset. See figure C on page 8 or Diag. 9
to the right.
The air cleaner will take 3-4 minutes to
calibrate the AIR QUALITY sensor. During
this time the sensor lights will flash on and
off. Once the sensor has calibrated, the
lights will stop flashing and the unit will begin
in AUTO mode.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Winix P300EU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Winix P300EU in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 26,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info